aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/2
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
ITEM NO: I644-453 Dresser
HARDWARE LIST:
No. Description Sketch Quantity
A12 PCS
B
C
D Allen Wrench 4mm 1 PC
COMPONENTS LIST:
No. Description Sketch Quantity
1 Case 1 PC
2 Metal Leg 4 PCS
3
12 PCS
12 PCS 1 PC
Support Leg
Adjust the leveler
when necessary
Leveler on Legs
& Support Leg
Cedar-lined Bottom Drawers
Felt-lined Top Drawers
Bolt Ø5/16" x 1"
Lock Washer Ø5/16"
Flat Washer Ø5/16" x 3/4"
Ensure support leg makes
proper contact with the
ground by adjusting leveler.
07-19-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
STEP 1: Put the case upside down on a soft surface.
STEP 2: Attach the metal legs by using 12 bolts (A), lock washers (B) and flat washers (C).
Use the allen wrench (D) to tighten all bolts.
ITEM NO: I644-453 Dresser
A
B
C
D
Metal Leg
Support Leg
STEP 4: Return the case to the upright position.
STEP 3: Attach the support leg as shown below.
07-19-2023
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
aspenhome I644-456 Assembly Instructions
-
-
-
-
-
-
-
-
-
