2. aspenhome
  3. I631-9100

aspenhome I631-9100 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the aspenhome Cocktail Table I631-9100. This document provides a detailed guide on how to put together your new table, covering the necessary hardware, tools, and step-by-step assembly process. It also mentions adjusting the leveler on the legs for stability. I'm ready to answer any questions you might have about this document or the assembly process.
  • What tools are required for assembly?
    What is included in the hardware list?
    How do I attach the legs to the table top?
    Where is this product Made?
Page 1/2
ITEM NO: I631-9100 Cocktail Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
2 Shelf Frame
3
1 PC
1 PC
Leg
Table Top
Hex Bolt Ø1/4" x 2"
1 PC
Allen Wrench 4mm
8 PCS
4 PCS
8 PCS
8 PCS
Adjust the leveler
when necessary
Leveler on Legs
05-23-2023
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 2: Attach the shelf frame to legs by using 4 bolts(A), lock washers(B), flat
washers(C) with an allen wrenchs(D). Completely tighten all bolts. Turn the assembled
table to the upright position.
STEP 1: Lay the table top face down on a soft surface. Attach the legs to table top by using
4 bolts(A), lock washers(B), flat washers(C) with an allen wrench(D). Do not completely
tighten bolts.
ITEM NO: I631-9100 Cocktail Table
Table Top
Leg
Leg
B
CD
A
Shelf Frame
Leg Leg
B
CD
A
Shelf Frame
05-23-2023
/