aspenhome I631-9130 Assembly Instructions
- Type
- Assembly Instructions
Page 1/2
ITEM NO: I631-9130 Chairside Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
2 Shelf Frame
3
1 PC
1 PC
Leg
Table Top
Hex Bolt Ø1/4" x 2"
1 PC
Allen Wrench 4mm
8 PCS
4 PCS
8 PCS
8 PCS
Adjust the leveler
when necessary
Leveler on Legs
Removable Drink Tray
with Cork Pads
E Tray with Cork Pad
05-23-2023
1 PC
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 2: Attach the shelf frame to legs by using 4 bolts(A), lock washers(B), flat
washers(C) with an allen wrenchs(D). Completely tighten all bolts. Turn the assembled
table to the upright position.
STEP 1: Lay the table top face down on a soft surface. Attach the legs to table top by using
4 bolts(A), lock washers(B), flat washers(C) with an allen wrench(D). Do not completely
tighten bolts.
Table Top
Leg
Leg
B
CD
A
Shelf Frame
Leg
B
CD
A
Shelf Frame
ITEM NO: I631-9130 Chairside Table
STEP 3: Put the tray with cork pads in drawer as shown below.
05-23-2023
Tray with Cork Pads
-
1
-
2
aspenhome I631-9130 Assembly Instructions
- Type
- Assembly Instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
aspenhome I644-9130 Assembly Instructions
-
-
-
-
-
-
-
-
-