aspenhome I631-239 Assembly Instructions

Type
Assembly Instructions
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/2
ITEM NO: I631-239 Pier Base
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
FUNCTIONALITY INSTRUCTION
Adjust the leveler
when necessary
Leveler on Legs
Adjustable Wood Shelves
Tempered Glasses
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
21 PC
Leg
Case
Hex Bolt Ø1/4" x 2"
1 PC
Allen Wrench 4mm
8 PCS 4 PCS
8 PCS
8 PCS
05-29-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
STEP 2: Reverse each handle by removing the screws while each door is open and attach all
handles to the front of the doors with screws as shown below.
Screw Screw
Handle
Handle
STEP 1: Lay the case face down on a soft surface. Attach the legs to case by using 8 bolts(A),
lock washers(B), flat washers(C). Completely tighten all bolts. Turn the assembled base to the
upright position.
ITEM NO: I631-239 Pier Base
Leg
B
CD
A
05-29-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/2
ITEM NO: I631-272 72'' Console
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
FUNCTIONALITY INSTRUCTION
If you prefer to adjust the shelf
location, remove the screws and
move shelf brackets to the
desired location. Then secure the
brackets to shelf with screws.
Adjust the leveler
when necessary
Leveler on Legs
Adjustable Wood Shelves
Tempered Glasses
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
2
3
1 PC
Side Leg
Case
Hex Bolt Ø1/4" x 2"
1 PC
Allen Wrench 4mm
8 PCS 4 PCS
10 PCS
10 PCS Central Leg
Support Leg 1 PC
1 PC
4
E
Hex Bolt Ø1/4" x 1-1/2" 2 PCS
05-25-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
ITEM NO: I631-272 72'' Console
STEP 2: Reverse each handle by removing the screws while each door is open and attach all
handles to the front of the doors with screws as shown below.
Screw Screw
Handle
Handle
STEP 1: Lay the case face down on a soft surface. Attach the side legs and central leg to
case by using 8 bolts(A), 2 bolts(B), 10 lock washers(C), 10 flat washers(D). Completely
tighten all bolts. Install the support leg as well. Once legs are all secure, turn the assembled
console to the upright position.
Side Leg
C
DE
A
Support Leg
Central Leg
Central Leg
CD
B
E
05-25-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/4
ITEM NO: I631-272H 72" Bridge & Back Panel
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
FUNCTIONALITY INSTRUCTION
COMPONENTS LIST:
No.
1Description Sketch Quantity
2 Back Panel Left
3
1 PC
1 PC
Top Strip
Bridge
4 Back Panel Right 1 PC
51 PC
1 PC
Bottom Strip
I631-272
I631-272H
I631-285
I631-239
I631-239
I631-285
05-31-2023
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
A
Allen Wrench 4mm
E
Wood Screw #4 x 1-3/16" 8 PCS
2 PCS
22 PCS
F
G Female Bolt Ø1/4"x13/16"
Hex Bolt Ø1/4" x 7/8"
10 PCS
Metal Plate 6 PCS
20 PCS
22 PCS
H
Hex Bolt Ø1/4" x 1-1/2" 2 PCS
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/4
ITEM NO: I631-272H 72" Bridge & Back Panel
STEP 1: Assemble the back panel(left) to back panel(right) by using 2 bolts(B), lock washers(C),
flat washers(D), and female bolts(G) with 2 allen wrench(E) as shown below. Do not completely
tighten bolts.
Back Panel (Right)
Back Panel (Left)
STEP 2: Attach the top strip and bottom strip to back panel assembly by using 8 wood
screws(H) as shown below.
H
B
E
Top Strip
Bottom Strip
H
CD
GE
05-31-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 3/4
ITEM NO: I631-272H 72" Bridge & Back Panel
Back Panel Assembly
I631-272
Metal Plate
I631-272
A
F
C
D
E
STEP 3: Place the back panel assembly on the console by using 4 bolts(A), lock washers(C),
flat washers(D) with 2 metal plates(F) as shown below. Do not completely tighten bolts.
STEP 4: Attach the side assemblies to the console/back panel assembly by using 8 bolts(A),
lock washers(C), flat washers(D) with 4 metal plates(F) as shown below. Do not completely
tighten bolts.
A
C
D
E
F
Note: The side assemblies where please refer to the assembly instruction(I631-285).
05-31-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 4/4
ITEM NO: I631-272H 72" Bridge & Back Panel
F
F
A
E
E
A
Bridge
GE
EG
STEP 5: Attach the bridge to hutches by using 8 bolts(A), lock washers(C), flat washers(D) and
female bolts(G) with 2 allen wrenchs(E) as shown below. Completely tighten all bolts.
STEP 6: When the combination is complete, insert plastic plugs("F" on the hardware bag
of the pier hutch) into the holes on both side panels as shown below.
CD
DC
05-31-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/1
ITEM NO: I631-285 Pier Hutch
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
FUNCTIONALITY INSTRUCTION
Adjust the leveler
when necessary
Leveler on Legs
STEP 1: Place the hutch on the base by using 4 bolts(B), lock washers(C), flat washers(D)
with 2 metal plates(A) as shown below. Completely tighten all bolts.
Metal Plate
I631-285
I631-239 B
A
05-31-2023
F
F
STEP 2: When this base is used alone, insert plastic plugs (F) into the holes on both side
panels as shown below.
Note: Please follow the group assembly instruction when this base is combined with the
bridge & back panel (I631-272H).
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
A Hex Bolt Ø1/4" x 7/8"
1 PC
Allen Wrench 4mm
4 PCS
E Plastic Plug 8 PCS
4 PCS
4 PCS
F
Metal Plate 2 PCS
C
D
E
I631-239
I631-285
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

aspenhome I631-239 Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI