Whirlpool AGB 547/WP User guide

Brand: Whirlpool

Model: AGB 547/WP

Type: User guide

Whirlpool AGB 547/WP is a high-performance electric grill with water cooking on cast iron. It is ideal for grilling a variety of foods, including meat, fish, vegetables, and more. The grill features a large cooking surface, so you can cook multiple items at once. It also has a built-in water bath, which helps to keep food moist and juicy. The grill is easy to use, with simple controls and a clear display. It also has a number of safety features, such as a cool-touch exterior and a non-stick coating.

031_03

Installation, operating and

maintenance instructions

07/2007

ELECTRIC GRILL WITH WATER

COOKING ON CAST IRON

AGB 611/WP

AGB 547/WP

031

03 - Electric grill with water cooking on cast iron

Models and dimensions page 3

Technical data 5

Installation instructions 6

Installation 6

Legal and technical requisitese 6

Installazione 6

Wiring 6

Unipotential 6

Start-up 6

Using the appliance 7

Ignition 7

Emptying the bath 7

Cleaning and taking care

of the appliance

What to do if not using the appliance for

a long time 7

What to do if something goes wrong 7

Maintenance 7

WEEE Directive 8

Wiring diagrams 9

Warning 10

INDEX

031

03 - Electric grill with water cooking on cast iron

AGB 611/WP

400 x 650 x 270

Weight approx. 28,5 kg

Main switch

Water drain

release

Pilot lamp (resistances)

Pilot lamp (voltage)

Oil outlet

Regulator

ACEBDF

Dimensions

031

03 - Electric grill with water cooking on cast iron

Dimensions

AGB 547/WP

400 x 700 x 300

Weight approx. 28,5 kg

ACEBDF

Main switch

Water drain

release

Pilot lamp (resistances)

Pilot lamp (voltage)

Oil outlet

Regulator

031

03 - Electric grill with water cooking on cast iron

Model

AGB 611/WP

AGB 547/WP

Dim.: LxWxH

400 x 650 x 270

400 x 700 x 300

Voltage rating

400V 3N / 230 V 3

Power

4.5 kW

Lead wire / Section

4 x 1.5 mm

/ 5 x 1.5 mm

4 x 1.5 mm

/ 5 x 1.5 mm

2 - CHARACTERISTICS OF THE APPLIANCES

3 - TECHNICAL DATA

TIPO/TYPE

CAT/KAT GAS/GAZ G30 G31 G20 G25

II2H3B/P P mbar 30 30 20 -

II2H3+ P mbar 30 37 20

II2H3+ P mbar 28 37 20 -

25II2L3B/P P mbar 30 30

II2ELL3B/P P mbar 50 50 20 20

II2E+3+ P mbar 28 37 20 25

II2H3B/P P mbar 50 50 20 -

I2E P mbar - - 20 -

--II2H3B/P P mbar 30 30

II2H3+ P mbar 28 37 20 -

I3B/P P mbar 30 30

I3+ P mbar 28 37

SE FI DK CZ SK SI

IT CH PT

ES IE GB GR

FR BE

AT CH

EE LV LT

NO MT CY IS HU

MOD.

ART.

Qn kW

MADE IN ITALY

Predisposto a gas: - Gas preset: - Prevu pour gaz:

Eingestelt für Gas: - Preparado para gas: -

Geschuckt voor:

V AC kW Hz

THE APPLIANCE MUST BE CONNECTED IN COMPLIANCE WITH THE LAWS IN FORCE

AND INSTALLED IN A WELL-VENTILATED ROOM. READ THE INSTRUCTION MANUALS

BEFORE INSTALLING AND USING THE APPLIANCE.

THE APPLIANCE MUST BE INSTALLED BY QUALIFIED PERSONNEL.

The data plate is located on the rigth hand side of the

control panel and contains all the data needed for connecting

it up to the mains electricity supply.

031

03 - Electric grill with water cooking on cast iron

Before beginning installation, remove all packaging from

the appliance. Some parts are protected with an adhesive

film which should be carefully removed.

Any remnants of glue should be thoroughly cleaned using

suitable substances such as benzine. Under no circum-

stances should abrasive substances be used.

Fit the legs to the appliance; the appliance must be level-

led using a spirit level. Slight irregularities can be levelled

by adjusting the feet themselves.

With table models, make sure that the base chosen is ca-

pable of supporting the weight of the appliance. The main

switch or plug should be located in the vicinity of the ap-

pliance and easy of access. We recommend installing the

machine under a range hood so that all the fumes are re-

moved as quickly as possible. If the appliance is to be in-

stalled near walls, dividing walls, kitchen equipment or de-

corative pannelling, these should be in non-inflammable

material or covered with non-inflammable material.

Make sure that all fire prevention standards and safety pre-

cautions are strictly adhered to.

Warning!

Carefully measure the distance between the appliance

and the edge of the base (Fig. 2).

Legal and technical requisites

When installing the appliance, the following safety stan-

dards must be adhered to:

- Local accident prevention standards

- Current CEI standards.

Installation

Installation, start-up and maintenance should only be car-

ried out by expert personnel. All work required to install

the appliance should be carried out in compliance with all

local standards and regulations. The manufacturers decli-

ne all responsibility where poor performance is due to in-

correct installation in disregard of the above conditions.

Warning!

In compliance with international regulations, when

connecting the appliance to the mains power supply, a

device with a minimum aperture of 3 mm between con-

tacts must be fitted upstream of the appliance, al-

lowing omnipolar disconnection of the appliance from

the mains.

Wiring

When choosing the lead wire, make sure it has the following

characteristics: it should be at least of the H07 RN-F type

and its section should be large enough for the appliance

(see "Technical specifications", page 5).

Wire entry is on the back wall. The terminal board is at the

front, behind the control panel.

Pass the wire through the core hitch and wire clamp, plug

the leads into their terminals on the board and secure

them. The earth lead must be a little longerthan the others

so that it is the last lead to disconnect if the wire clamp

breaks.

Unipotential

The appliance must be connected up to a unipotential sy-

stem. The connection screw is located at the back on the

right hand side. It is labelled.

Warning!

The manufacturers cannot be held responsible for any

damage due to inadequate or incorrect installation.

Under such circumstances the guarantee will be consi-

dered null and void.

Start-up

Before using the appliance for the first time, thoroughly

clean out the water bath (see paragraph entitled

“Cleaning and Taking Care of the Appliance”).

Check that the appliance is connected up properly and

start according to instructions overleaf.

INSTALLATION INSTRUCTIONS

031

03 - Electric grill with water cooking on cast iron

Warning!

- Beware of inexpert handling!

- Never leave the appliance on without any water in it!

- In the event of dry running, the safety thermostat will

intervene, interrupting operation until the tank is refil-

led in levels.

AGB 611/WP - AGB 547/WP - A heating area

controlled by a regulator.

Ignition

Check that the water drain release is closed. Fill the bath

with water up to the level marked. Turn on the main switch

upstream of the appliance.

Turn the knob (A), Fig. 1; the green light comes on

showing that the appliance is live.

Use of the regulator

Turn the regulator (B) clockwise, bearing in mind that the

minimum is reached in the fine part of the ”comet” and the

maximum on the large part.

A pilot light signals the tripping of the resistance.

Turning the hand-knob on position ●, the resistance will

remain on (do not use the appliance in this position for

more than 20/30 minutes in continuous operation).

Emptying the bath

First of all a suitable bowl for emptying the water into

should be found. The bowl should be heat-resistant.

Fit the drainage pipe as shown in the picture (2). Open the

water drain tap.

Important

Make sure you respect the distance between the ap-

pliance and the edge of the base.

CLEANING AND TAKING CARE OF THE

MACHINE

Warning!

Never clean the appliance with jets of water, whether

direct or pressurised.

Allow the machine to cool down before cleaning

Before starting to clean the appliance, disconnect from

the mains. For easier, more thorough cleaning, the resi-

stances may be raised after having removed the cast-iron

grids (see drawing 3). Lift the resistances as far as they

will go. Wash the steel parts with hot water and detergent,

then dry with a dry cloth.

Avoid using abrasive or corrosive detergents which could

damage the steel.

The cast-iron grids may be degreased with a steel-wool

pad, then cleaned with soap and water and lastly protec-

ted with a thin film of oil.

What to do if not using the appliance

for a long time

Thoroughly clean and dry the machine as described.

Disconnect the power supply.

What to do if something goes wrong

If anything goes wrong, immediately turn the appliance

off, then turn off the power supply at the switch located

upstream of the appliance, and call the aftersales depart-

ment.

MAINTENANCE

All maintenance should be carried out by qualified per-

sonnel only. Before carrying out any maintenance work,

unplug the appliance or turn off the switch upstream of the

appliance.

USING THE APPLIANCE

MAX 120 mm

2 3

031

03 - Electric grill with water cooking on cast iron

THE 2002/96/EC DIRECTIVE (WEEE):

information to users

This informational note is meant only for ow-

ners of equipment marked with the symbol

shown in Fig. A on the adhesive label featuring

the technical specifications applied on the actual product

(the label also giving the serial number).

This symbol indicates that the product is classified, ac-

cording to the regulations in force, as an item of electrical

and electronic equipment and conforms to EU Directive

2002/96/EC (WEEE) meaning that, at the end of its service

life, it must be treated separately from domestic waste,

i.e. it must be handed in free of charge to a separate wa-

ste electrical and electronic equipment collection centre

or returned to the reseller when buying a new equivalent

item of equipment.

The user is responsible for delivering the unit at the end of

its life to the appropriate collection facilities. Failure to do

so shall result in the user being subject to the penalties

prescribed by the legislation in force on waste.

Suitable separated collection so that the unit no longer

used can be sent off for environmentally compatible recy-

cling, treatment and disposal helps avoid possible negati-

ve effects on the environment and on health and facilita-

tes the recycling of the product's component materials.

For more detailed information on available collection sy-

stems, contact the local waste disposal service or the

shop you purchased the unit from.

Producers and importers fulfil their responsibility for envi-

ronmentally compatible recycling, treatment and disposal

both directly and by joining a collective scheme.

031

03 - Electric grill with water cooking on cast iron

Wiring diagrams

123456

1mA2 3 4

L1 L2 L3 PE

230 V 3

RRR

1mA 2 3 4

L1 L2 L3 N

P1 P2 S

12 3

264

2S4

153

456

400 V 3N

P1 P2

Line input terminal board

Switch

Microswitch

Contactor

Regulator

Orange pilot lamp

Résistance

Thermostat de sécurité

AGB 611/WP

AGB 547/WP

WARNING

THE MANUFACTURER CANNOT BE HELD RESPONSIBLE

FOR ANY INACCURACIES IN THIS BOOKLET DUE TO

COPYING OR PRINTING ERRORS.

DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPRO-

VEMENT, THE MANUFACTURER RESERVES THE RIGHT

TO MAKE ANY CHANGES DEEMED NECESSARY.

THE MANUFACTURER CANNOT BE HELD RESPONSI-

BLE IF THE INSTRUCTIONS CONTAINED IN THIS MA-

NUAL ARE NOT OBSERVED.

031

03 - Electric grill with water cooking on cast iron

WHIRLPOOL EUROPE srl

V.le Guido Borghi, 27

I – 21025 Comerio – VA

Whirlpool AGB 547/WP User guide

Whirlpool AGB 547/WP User guide

Whirlpool AGB 547/WP User guide

Related papers

Other documents