HiB Elara Datasheet

  • I've reviewed the technical datasheet for the Elara Mono Basin Mixer from HiB. This document covers the mixer's specifications, including its water pressure suitability, material composition, and key features like the ceramic disc cartridge and adjustable aerator. I'm ready to answer any questions you have about this product.
  • What is the minimum and maximum suitable water pressure?
    What material is the mixer made of?
    Is waste included with the Elara Mono mixer?
Technical Data
Elara Mono Mixer
HiB recommend you receive the product before commencing with installation as all sizes and measurements are approximate.
HiB try and ensure all measurements are as accurate as possible.
In the interest of continuous product development, HiB reserves the right to alter specification as necessary. E & OE.
Ver No. 220822
Product(s) Elara Mono Basin Mixer and slotted clicker
waste
Article Number(s) N0TAP02ELA
Product Description Elara Mono basin mixer tap
Technical Data
Suitable water pressure Min. 0.1 bar, Max. 6.0 bar
Material Brass Body, Zinc -alloy Handle
Finish Type Chrome Plated to BS EN 248
Cartridge 35mm Triduon Ceramic Disc Cartridge
Aerator Neoperl Adjustable Slim Aerator
Fitting UK: M10 x 350mm G1/2” bsp Female Flexi Tails
EU: M10 x 350mm G3/8” BSP Female Flexi Tails
Operation Li up for water flow, rotate for temperature control
Features
Waste included? Yes
Spout projection 168.8mm
Standards Complies with BS6920, BS EN200
WRAS approved
Additional information Supplied with a G1 1/4” sprung waste
How long is the warranty? 10 years against manufacturing faults (excluding serviceable
parts)
System Pressure
(Bar)
0.1 0.2 0.3 0.5 1.0 1.5 2.0 3.0 4.0 5.0
Elara Mono 3.6 4.8 5.8 7.3 10.3 12.6 14.5 17.8 20.5 22.9
Technical Data
Elara Mono Mixer
HiB recommend you receive the product before commencing with installation as all sizes and measurements are approximate.
HiB try and ensure all measurements are as accurate as possible.
In the interest of continuous product development, HiB reserves the right to alter specification as necessary. E & OE.
Ver No. 220822
/