Technical Data
Elara Bath Filler
HiB recommend you receive the product before commencing with installation as all sizes and measurements are approximate.
HiB try and ensure all measurements are as accurate as possible.
In the interest of continuous product development, HiB reserves the right to alter specification as necessary. E & OE.
Ver No. 220822
Product(s) Elara Bath Filler
Article Number(s) N0TAP04ELA
Product Description Elara Deck Mounted Bath Mixer
Technical Data
Suitable water pressure Min. 0.5 bar, Max. 6.0 Bar
Material Brass Body, Zinc -alloy Handle
Finish Type Chrome Plated to BS EN 248
Cartridge 1/4 Turn 3/4” Ceramic Disc Valves
Aerator Laminar stream straightener
Fitting Brass G3/4” BSP tails
Operation Rotate Handles
Features
Waste included? No
Spout projection 144mm
Standards Complies with BS5412, BS EN200 WRAS approved
Additional information
How long is the warranty? 10 years against manufacturing faults (excluding serviceable
parts)
System Pressure
(Bar)
0.1 0.2 0.3 0.5 1.0 1.5 2.0 3.0 4.0 5.0
Elara Bath Filler - 8.0 9.7 12.7 17.9 - 25.6 31.5 - -