2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Faucets
  6. HiB
  7. Atlas

HiB Atlas Datasheet

  • Hello! I have analyzed the provided datasheet for the HiB Atlas Tall Mono Mixer. This document outlines the technical specifications of the mixer tap, including material components, water pressure suitability, and cartridge specifics, along with information on warranty and compliance standards. I'm ready to answer any questions you have about it.
  • What is the minimum suitable water pressure?
    What material is the tap made from?
    What type of cartridge does the tap use?
    Is waste included with the tap?
    How long is the warranty?
Technical Data
Atlas Tall Mono Mixer
HiB recommend you receive the product before commencing with installation as all sizes and measurements are approximate.
HiB try and ensure all measurements are as accurate as possible.
In the interest of continuous product development, HiB reserves the right to alter specification as necessary. E & OE.
Ver No. 220822
Product(s) Atlas Tall Mono Mixer and slotted waste
Article Number(s)
N0TAP03ATL
N1TAP03ATL
N1TAP03ATL
Product Description Atlas Tall Mono Basin Mixer Tap
Technical Data
Suitable water pressure Min. 0.5 bar, Max. 6.0 Bar
Material Brass Body, Zinc-alloy handles
Finish Type Chrome, Matt Black, Brushed Brass
Cartridge CITEC 35mm 110 Turn Cold Start Ceramic Disc Cartridge
Aerator Neoperl Slim Aerator
Fitting UK: M10 x 350mm G1/2” bsp Female Flexi Tails
EU: M10 x 350mm G3/8” BSP Female Flexi Tails
Operation Li up for water flow, rotate for temperature control.
Features
Waste included? Yes
Spout projection 166mm
Standards Complies with BS6920, BS EN200
Additional information
How long is the warranty? 10 years against manufacturing faults (excluding serviceable
parts)
System Pressure
(Bar)
0.1 0.2 0.3 0.5 1.0 1.5 2.0 3.0 4.0 5.0
Atlas Tall Mono - - - 4.4 6.0 - 8.3 10.1 - -
Technical Data
Atlas Tall Mono Mixer
HiB recommend you receive the product before commencing with installation as all sizes and measurements are approximate.
HiB try and ensure all measurements are as accurate as possible.
In the interest of continuous product development, HiB reserves the right to alter specification as necessary. E & OE.
Ver No. 220822
/