2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Faucets
  6. HiB
  7. Atlas

HiB Atlas Datasheet

  • Hello! I've reviewed the datasheet for the HiB Atlas Mono Basin Mixer Tap. The document provides technical details about the tap, including its suitable water pressure, material, finish types, cartridge information, aerator type, fitting details, operation, and the included waste. It also specifies the spout projection and warranty information. I'm here to help if you have any questions about the information in the document or the device itself.
  • What is the minimum water pressure required for this mixer tap?
    What materials are used in the construction of this tap?
    What is the warranty period for this product?
Technical Data
Atlas Mono Mixer
HiB recommend you receive the product before commencing with installation as all sizes and measurements are approximate.
HiB try and ensure all measurements are as accurate as possible.
In the interest of continuous product development, HiB reserves the right to alter specification as necessary. E & OE.
Ver No. 220822
Product(s) Atlas Mono Mixer and slotted clicker waste
Article Number(s)
N0TAP02ATL
N1TAP02ATL
N2TAP02ATL
Product Description Atlas Mono Basin Mixer Tap
Technical Data
Suitable water pressure Min. 0.5 bar, Max. 6.0 Bar
Material Brass Body, Zinc-alloy handles
Finish Type Chrome, Matt Black, Brushed Brass
Cartridge CITEC 35mm 110 Turn Cold Start Ceramic Disc Cartridge
Aerator Neoperl Slim Aerator
Fitting UK: M10 x 350mm G1/2” bsp Female Flexi Tails
EU: M10 x 350mm G3/8” BSP Female Flexi Tails
Operation Li up for water flow, rotate for temperature control.
Features
Waste included? Yes
Spout projection 153mm
Standards Complies with BS6920, BS EN200
Additional information Supplied with a G1 1/4” sprung waste
How long is the warranty? 10 years against manufacturing faults (excluding serviceable
parts)
System Pressure
(Bar)
0.1 0.2 0.3 0.5 1.0 1.5 2.0 3.0 4.0 5.0
Atlas Mono - - - 4.6 6.0 - 8.3 10.2 - -
Technical Data
Atlas Mono Mixer
HiB recommend you receive the product before commencing with installation as all sizes and measurements are approximate.
HiB try and ensure all measurements are as accurate as possible.
In the interest of continuous product development, HiB reserves the right to alter specification as necessary. E & OE.
Ver No. 220822
/