DAS 4 SG53 User manual

Brand: DAS 4

Model: SG53

Category: Watches

Type: User manual

DAS 4 SG53 is a feature-rich smartwatch with capabilities such as real-time location tracking, two-way calling, SOS alerts, and remote monitoring via a mobile app. It supports GPRS for data connectivity and has a built-in speaker and microphone for clear communication. With its IP67 resistance, it's protected against dust and water splashes. Stay connected, safe, and informed with DAS 4 SG53.

User Manual

SG53- SB54

Speaker: Do not insert sharp objects into the speaker,

because it may cause damage.

Turn o methods: Press the on/ o buon for 5 sec to

turn o the smartwatch (without SIM card). Do not turn

o the when the SIM card is inside.

Note: Keep the speaker away from water. If there is water

inside shake the smartwatch several mes.

Please read the User Manual carefully before using the

smartwatch.

• Please check if the package has all the accessories.

• Acquire a NANO SIM card and insert it into the smart-

watch while it is OFF.

• Please make sure the NANO SIM card supports GPRS

and caller ID.

• Install the APP.

• Scan the QR code to register.

Sound hole

Speaker

Microphone

Return

Sound hole

Speaker

ON/ OFF keyboard

Reset Key

Charging thimbl

Sim card

slot

1. Inserng SIM card

2. Funcons:

Step 1: Take o the

plasc cover and the

2 bolts

Step 3: Place the plasc

cover back

Step 4: Lock it by

screwing the cover with

the 2 bolts

Step 2: Insert the SIM card

into the slot with the chip

facing up

1. Inserng SIM card

2. Funcons:

• Wi posioning

• Base staon posioning

• Mobile phone client or computer GPRS service plaorm

• GPRS real me posioning, tracking, monitoring

• Phone book

• Loudspeaker

• Alarm clock

• Security fence support

• SOS support

• Low baery nocaon

• Weather forecast

• Remote shutdown

• Game

• Camera

• Photo album

• Call support

3. Scan the QR code and download the APP

a) Download the APP “SeTracker2”

b) APP register: It needs to manual register before you

the QR code or by adding them manually. The username

must unique and at least four characters (leer or digit).

Other informaon can be lled out by yourself. It is pos-

sible to change the password. You may nd references

from the registraon process below.

c) SIM cards in some countries need to be set up before

accessing the GPRS network. Please contact the SIM card

operator or check the website of the SIM card supplier

for further informaon.

d) IP & Port:

EU: pw,123456,ip,52.28.132.157,8001#

South America: pw,123456,ip,54.207.93.14,8001#

North America: pw,123456,ip,54.153.6.9,8001#

Note: If you insert the correct SIM card and the device

is online on the App, there is no need to set APN IP and

port commands

e) Main menu funcons introducon: Main manual

introducon: Aer the registraon, please login to the

APP with the correct account number and password. The

main menu will appear as below:

• Voice chat: Voice records can be send between the

smartwatch and APP. The maximum recording me is

15 seconds. The voice message can be played by short

pressing the “Power On” buon.

• Map: View the smartwatch

in real- me locaon. Both the

smartwatch and the phone with

the APP can be shown on the

map in the Map funcon. Click

“Locate” to start tracking for 3

minutes, the uploading interval

is 10 seconds, it will be back to

default mode aer 3 minutes.

On the Map you can disnguish

the locaon method that the

smartwatch is using. Blue icon

means LBS.

• Seng: Set all the parameters of the watch.

f) Smartwatch nocaons: The phone will receive all

nocaons coming from the watch. Press the “Alarm”

buon to enter the message nocaons in the APP.

4. Explanaon of the smartwatches Working mode

a) There are 3 basic working modes: Normal mode, Pow-

er saving mode & Follow-up mode. These working modes

are dierent with dierent uploading interval.

• Normal mode: Uploading interval is 10 minutes

• Power saving mode: Uploading interval is 1 hour

• Follow-up mode: Uploading interval is 1 minute

5. Further informaon about the watch

a) SOS buon: By pressing the SOS key (buon 2) for 3

seconds will iniate the alert state. The word SOS will be

displayed on the screen and the smartwatch will call the

3 SOS phone numbers alternavely in 2 rounds unl one

of them answers. Meanwhile the watch will also send a

message to the number that monitors the watch

b) Low power alert: The smartwatches baery appears in

percentage. When it reaches 20% and lower, it will send an

alerng message to the number that monitors the watch.

c) Voice chat: Click the talk, then you can chat with the APP.

d) Turn O: Press the “OFF” key to power o the watch

without the SIM card, or remote turn o via the APP.

e) Phone Book: The phone number can be used to make

voice calls. Find the phone book funcon in the APP, click

to enter, and then select the phone number to call. The

phone book can save up to 10 numbers.

6. Troubleshoong

a) Assume the watch can not be connected with the server

and the device shows no connecon with the network. Please

follow the next steps:

• Please check whether the watch’s NANO SIM card is GSM

support

• Check whether you have inserted the NANO SIM card

correctly and the screen play is normal (please refer to the

picture’s instrucons)

• Please check whether the IP, Port and ID numbers are correct.

You should make sure that the ID number on the watch is the

same as the ID number of the device itself. Also the user can

check the ID number of the device itself by sending the mes-

sage “pw,123456,ts#” from their cellphone to the watch (the

smartwatch must have a NANO SIM card inserted and powered

on). Please ask the distributor or dealer for further help

b) There are 2 cases if you are not registered on the APP.

• The ID number do not exist or have already been registered

(please ask the distributor or the dealer for further help).

• Your registered account name has already been used by

another, please select a dierent account name

7. Hardware Specicaons

8. Items contained in the package

9. FAQ:

a) Is the watch waterproof? Can I immerse it in water?

- This watch has IP67 resistance, which means that it is only dustproof.

b) What type of SIM card is suitable for this watch?

- The watch only supports SIM cards with 2G GSM communicaon

standard. To make a phone call, the voice call service of the SIM card

must be enabled. Please contact the local distributor or the dealer for

further informaon.

c) Does the watch emit strong radiaon? Will it cause health

problems?

www.das-4.com

- The watch has been tested by an authorized third- party agency.

The radiaon is minimal, almost zero and lower than the interna-

onal standards. It will cause no harm.

d) Can I use the smartwatch without a SIM card?

- If the watch does not have a SIM card, the communicaon related

funcons will be disabled, such as calls and SMS.

e) What are the requirements for the charger?

- Please use a standard USB charger for the smartwatch It is

recommended to use a mobile phone charger and avoid charging

the device through the USB port on a computer.

f) How long does it take to fully charge the smartwatch?

- It might take about 2 hours to charge the watch. There is a power

icon, which indicates the current power. When the power is low,

pleas charge it immediately.

g) Will it have any negave impact If the watch has not been used

for a long me?

- The power of the baery will drain completely if it is not used for

a long me. Before using it again, we recommend charging the

device for 10 minutes rst.

h) How safe is the baery? Will it explode or cause a re?

- The watch has a lithium polymer baery, which will not cause any

safety issues such as overheang or explosion of re. Moreover,

the stress tolerant structure will ensure the safety of the baery.

DAS 4 SG53 User manual

Brand: DAS 4

Model: SG53

Category: Watches

Type: User manual

Download PDF

report

DAS 4 SG53 User manual

DAS 4 SG53 User manual

Related papers

Other documents