2. DIODE LED
  3. Infrared LED On/Off Switch

DIODE LED Infrared LED On/Off Switch Installation guide

  • Hello! I'm an AI assistant that has reviewed the DiodeLED Installation Guide for the Infrared ON/OFF Switch, model DI-1710. This document provides detailed installation steps and specifications for the infrared switch, which is designed to control lighting using a 5-inch sensor. I'm ready to answer your questions about the specifications, wiring, and usage of this device.
  • What is the input voltage range for the switch?
    What is the maximum load the switch can handle?
    What is the sensor range of the infrared switch?
    Where can this switch be used?
IG051514-1.0
1.877.817.6028
www.DiodeLED.com
INSTALLATION GUIDE
®
[email protected] www.DiodeLED.com1 OF 1
INFRARED ON/OFF SWITCH
3
DO NOT CONNECT DIRECTLY TO HIGH VOLTAGE POWER!
Read all warnings and installaon instrucons thoroughly.
WARNING
Quick Specs
Installation
Wiring Connections
Input/Output Voltage 12V-24VDC
Max Load 36W/72W (12V/24V)
Ambient Temperature -4° ~ 122°F (-20° ~ 50°C)
Environment Suitable for dry / indoor locaons
Sensor Range 5 in.
+
-
Prior to connecng to power, mount
Infrared ON/OFF Switch to surface using
3M™ Velcro Adhesive Tape. Ensure to
leave a 5 in. maximum clearance for
sensor to trigger.
Aach lighng load and Plug-In Adapter.
Plug adapter into electrical receptacle.
1
Input From 12-24VDC
Plug-In Adapter
Output To LED Load
Infrared Sensor
(Sensor Range: 5 in.)
2
FIXTURE ‘OFF’
FIXTURE ‘ON’
When infrared
sensor is obstructed
less than 5 inches
the LED xture will
remain OFF.
When infrared sensor
is unobstructed further
than 5 inches the LED
xture will turn ON.
# DI-1710
/