Line up QR code label on blue line.
Activate Your System
Congratulations on choosing TracPhone LTE-1.
It’s time to get it activated!
To get started, turn off your TracPhone LTE-1.
Using an Internet-connected mobile device or
computer, either scan the QR code to the right or
enter the following url: www.kvh.com/LTEactivate
Upon submission of your activation order, your
TracPhone LTE-1 will typically be activated in
less than fifteen minutes.
After receiving your activation confirmation,
turn on your TracPhone LTE-1 and enjoy.
If you have any questions or concerns, please
contact KVH Airtime Services.
Refer to the
“Help” feature
available in the
LTE Manager
App or website
for operational
information.
KVH Airtime Services
Hours: 6:00 PM Sunday to 5:00 PM Friday (ET)
Phone: +1 401.851.3862
Line up QR code label on blue line.
PRELI
MI
NARY
CH
ECK
PRI
NT
ONLY
4/
27/18
FROM SOURCES OTHER THAN KVH. THIS DRAWING AND/OR SPECIFICATION MAY NOT BE REPRODUCED,
NOTICE: THIS DRAWING AND/OR SPECIFICATION IS THE PROPERTY OF KVH INDUSTRIES. ALL
INFORMATION CONTAINED HEREIN WHICH IS NOT KNOWN GENERALLY IN THE FIELD OF KVH SHALL BE
CONFIDENTIAL EXCEPT TO ANY EXTENT TO WHICH IT IS ESTABLISHED TO HAVE BEEN KNOWN PREVIOUSLY
COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION
SW: 26-0675-04
R
. JONES
A0
DO NOT SCALE DRAWING
TOLERANCES ARE:
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
LABEL QR CODE LTE-1
FRACTIONS DECIMALS ANGLES
MATERIAL
FINISH
.
XXX
.XX
CONTRACT NO.
QUALITY
CHECKED
DRAWN
APPROVALS
SCALE:
S. LEE
SHEET 1
DWG NO.
Middletown, Rhode Island 02842
KVH Industries, Inc.
CAGE CODE
SIZE
B
DATE
72197
REV.
1
A
234
B
C
D
A
B
C
D
4 3
OF
2 1
D. CUNNINGHAM
2:1
LTE-1
26-0675-04
SEE NOTE 2
4/24/18
ANSI/ASME Y14.5-2009
THIRD ANGLE PROJECTION
1
SEE NOTE 1
IN ACCORDANCE WITH
J. CABRAL
INTERPRET DRAWING
MANUFACTURING
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
- A0 REVISED PER ECO 12498
CHANGES TO THIS DRAWING MUST BE INCORPORATED
IN THE APPLICABLE KVH SOLID MODEL
NOTES:
UNLESS OTHERWISE SPECIFIED
1. MATERIAL: MAKE FROM KVH PART #26-0675 (BRADY LABEL THT-19-434-1)
2. FINISH: LABEL SHOWN IS A REPRESENTATION. USE KVH INTERFACE 74-0150 TO GENERATE LABEL.
BLACK MARKING ON SILVER LABEL. CONTRAST PER MIL-STD-130.
3. PRINT LABEL USING LABEL MANUFACTURER'S RECOMMENDED THERMAL TRANSFER ROSIN BASED RIBBON.
NOTES:
UNLESS OTHERWISE SPECIFIED
1. MATERIAL: MAKE FROM KVH PART #26-0675 (BRADY LABEL THT-19-434-1)
2. FINISH: LABEL SHOWN IS A REPRESENTATION. USE KVH INTERFACE 74-0150 TO GENERATE LABEL.
BLACK MARKING ON SILVER LABEL. CONTRAST PER MIL-STD-130.
3. PRINT LABEL USING LABEL MANUFACTURER'S RECOMMENDED THERMAL TRANSFER ROSIN BASED RIBBON.
2.000
3.000
000000001
•••••••••