Neutrik convertCON Assembly Instruction

Neutrik
Brand
Neutrik
Model
convertCON
Type
Assembly Instruction
Slide the boot onto the cable.
Prepare cable as shown.
Slide back the shell (change gender from
female to male).
Insert wires into the terminals and solder
them.
Put chuck onto the cable and slide insert &
chuck into the housing.
Attention: Pay attention to align the chuck on the
guiding key.
A
B
C
D
ASSEMBLY INSTRUCTION
convertCON NC3FM-C, 3 Pole XLR Cable Connector
|
1. Hold
1. PUSH
2. Slide back
18
4
E1. Hold
2. Slide
Guiding key
Page 1
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
()
LI
CH
USA
UK
T: F:
T: F:
T: F:
T: F:
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811 441 +44 1983 / 811 439
Draft. Nr.: BDA 212 Update: 30.06.2008/ 3102M1661 II
Data subject to change without prior notice. 2008 NEUTRIK . ALL RIGHTS RESERVED.©®
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH
Ltd.Hong Kong
DE / NL / AT
FR
JP
HK
T: F:
T: F:
T: F:
T: F:
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
www.neutrik.com Page 2
1. PUSH
2. Slide
1. Hold
Finish installation by turning the boot onto
the connector.
Easy selectable gender from male to female
and vice versa:
To change gender hold the boot with one
hand. Press the push down with the other
hand and slide the shell to desired gender.
Handling
FEMALE
MALE
Convert FEMALE
Convert MALE
F
ATTENTION
convertCON does not lock with all chassis connectors!
Pay regard to orientation while connecting two convertCON.
Connecting two convertCON
ASSEMBLY INSTRUCTION convertCON
I
  • Page 1 1
  • Page 2 2

Neutrik convertCON Assembly Instruction

Neutrik
Brand
Neutrik
Model
convertCON
Type
Assembly Instruction
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents