2. Neutrik
  3. NJ3FC6

Neutrik NJ3FC6 Installation guide

  • Hello! I've reviewed the assembly instructions for the NEUTRIK NJ3FC6 cable jack. This document outlines the procedure for building the locking 1/4" cable jack from start to finish. I can assist you with any questions you might have regarding the steps, components, or any other aspect of the process.
  • What is the first step in assembling the cable jack?
    What should be done after preparing the cable?
    How is the insert secured?
    What should you pay attention to when putting the chuck onto the cable?
G
FINISH
Slide first the boot and secondly the housing onto
the cable.
Prepare cable as shown.
Solder the wires.
Slide the housing onto the insert.
Fix the insert with the screw.
Put chuck onto the cable and slide it into the
housing.
Attention: Pay attention to the guiding key.
Finish the assembly by turning the bushing onto the
connector.
A
B
C
D
E
F
A
B
C
E
F
Draft. Nr.: BDA 274 Update: 01.04.2010/ 3102M1831 II
Data subject to change without prior notice. 2010 NEUTRIK . ALL RIGHTS RESERVED.©®
ASSEMBLY INSTRUCTION
www.neutrik.com
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
()
LI
CH
USA
UK
T: F:
T: F:
T: F:
T: F:
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811441 +44 1983 / 811 439
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH
Ltd.Hong Kong
DE / NL / AT
FR
JP
HK
T: F:
T: F:
T: F:
T: F:
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
ASSEMBLY INSTRUCTION
NJ3FC6 Locking 1/4" Cable Jack
|
D
18
4
G
1.
2.
GR
RI
TIP
/