Troy-Bilt 12AV565Q711 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 12AV565Q711 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
A
C
D
B
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Insert carriage bolt and tighten with wing nuts.
Move hairpin clip to inside hole.
Secure cable to lower handle with
cable tie provided with unit.
Lift handle to extended position.
Tighten star knobs.
Starter
Rope
Blade Control Handle
Star Knobs
778-10633C© 2006 12AV565Q711
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Tighten rope guide wing knob.
A
B
IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
Open Fuel Valve.
Fill tank with gas to within 1/2 inch of top of tank.
Depress blade control handle and hold.
Fill engine with entire contents of oil
bottle supplied with your mower.
Pull starter rope with quick, full armstroke. If engine
does not start after ten seconds of repeated pulls,
repeat steps seven through nine.
Need Help?
Gas Cap
Fuel Valve
Oil Fill
Call 1-800-800-7310
/