Comcast Conference System Getting Started Manual
- Type
- Getting Started Manual
This manual is also suitable for
Comcast Conference System is a cutting-edge solution for seamless communication and collaboration. This system boasts an array of features designed to enhance your conferencing experience:
-
Exceptional Video Conferencing: Engage in crystal-clear video calls with up to four participants simultaneously. The high-quality camera captures sharp and vibrant images, ensuring everyone is seen and heard with clarity.
-
Immersive Audio Experience: Experience lifelike audio with the built-in microphone and speaker system. Noise cancellation technology minimizes background noise, providing a distraction-free environment for effective communication.
Comcast Conference System is a cutting-edge solution for seamless communication and collaboration. This system boasts an array of features designed to enhance your conferencing experience:
-
Exceptional Video Conferencing: Engage in crystal-clear video calls with up to four participants simultaneously. The high-quality camera captures sharp and vibrant images, ensuring everyone is seen and heard with clarity.
-
Immersive Audio Experience: Experience lifelike audio with the built-in microphone and speaker system. Noise cancellation technology minimizes background noise, providing a distraction-free environment for effective communication.
Connect the power cable to the
adaptor box and plug in to an
electrical outlet.
THIS ADAPTOR BOX DOES NOT
HAVE AN ON/OFF BUTTON.
PLUGGING IT IN (AND OUT) IS
HOW YOU WILL TURN THE
SYSTEM ON AND OFF.
Power Adaptor
Camera USB IRAudio
Ethernet
Reset
Power
HDMI
HDMI
Cable In
HDMI
TV Out
HDMI
Back of Adaptor Box
Network Messages Power
SD Card
Adaptor Box
Camera with Clip
Power Cable HDMI Cable (2x)
Note: You may not need both HDMI
cables if you already have one in use.
Power Adaptor USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
Open Me First
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Network Messages Power
SD Card
WPS
Use for wireless setup with
WPS capable routers.
(Currently not available)
SD Slot
Use for viewing media
Message Indicator
Glowing LED indicates
new messages.
Network Indicator
Glowing LED
indicates connection
to home network.
Power
Glowing LED indicates
adaptor is on.
HDMI
Cable In
HDMI
TV Out
USB/IR Power
Ethernet Camera Audio
Back
Front Top
WPS
Keep for future reference, but if you decide to toss, please recycle.
Getting Started Guide v.3.1.3
Printed in China
Reset
Insert a thin object to hold the internal Reset button for
desired result:
Normal Reset
Hold for 2-5 seconds to reboot and keep personal settings.
Factory Reset
Hold for at least 15 seconds to delete ALL personal settings
and restore to default factory settings.
Support Information
Visit www.comcast.com/skype for
online support.
Call our customer care sta at
877-704-7713 for assistance.
TV
A/V Receiver
OFF
Turn o TV, XFINITY
set-top box and A/V
receiver (if using).
XFINITY Set-Top Box
Messages
Power
3
POWER OFF
On/O Indicator
Glowing LED
indicates
camera is on.
Lens with Shutter
Shutter closes when
camera is o.
Clip
Adjust for
placement.
Microphones Microphones
During setup, you’ll connect to the Internet and create
a Skype on XFINITY profile. Save time and have the
following handy before you begin:
+
Back of Adaptor Box
Modem
Ethernet
cable not
provided
Camera USB
IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
5
CONNECT TO INTERNET
Ethernet: Plug a CAT-6 Ethernet
cable (not provided) into the
Ethernet port on the adaptor box
then plug the other end into your
modem/router.
OR
Wireless: Skip this step and
follow the instructions during
TV activation.
- Comcast ID
- Comcast Password
Your Comcast ID is the username
for your @comcast.net email address.
Visit https://customer.comcast.com
if you don’t know your Comcast ID.
Comcast Account
- Skype Name
- Skype Password
Don’t have a Skype account?
Create one during activation.
Skype Account
For wireless connections
If using a wireless network, you’ll need your Network Name (SSID) and Password (Key).
For your Skype on XFINITY profile =
Remote
2
GATHER INFORMATION
1
CHECK THE BOX
ADAPTOR BOX DETAILS CAMERA DETAILS
4
PLUG IN POWER CABLE
Skype™ on XFINITY
Getting Started Guide
Connect the power cable to the
adaptor box and plug in to an
electrical outlet.
THIS ADAPTOR BOX DOES NOT
HAVE AN ON/OFF BUTTON.
PLUGGING IT IN (AND OUT) IS
HOW YOU WILL TURN THE
SYSTEM ON AND OFF.
Power Adaptor
Camera USB IRAudio
Ethernet
Reset
Power
HDMI
HDMI
Cable In
HDMI
TV Out
HDMI
Back of Adaptor Box
Network Messages Power
SD Card
Adaptor Box
Camera with Clip
Power Cable HDMI Cable (2x)
Note: You may not need both HDMI
cables if you already have one in use.
Power Adaptor USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
Open Me First
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Network Messages Power
SD Card
WPS
Use for wireless setup with
WPS capable routers.
(Currently not available)
SD Slot
Use for viewing media
Message Indicator
Glowing LED indicates
new messages.
Network Indicator
Glowing LED
indicates connection
to home network.
Power
Glowing LED indicates
adaptor is on.
HDMI
Cable In
HDMI
TV Out
USB/IR Power
Ethernet Camera Audio
Back
Front Top
WPS
Keep for future reference, but if you decide to toss, please recycle.
Getting Started Guide v.3.1.3
Printed in China
Reset
Insert a thin object to hold the internal Reset button for
desired result:
Normal Reset
Hold for 2-5 seconds to reboot and keep personal settings.
Factory Reset
Hold for at least 15 seconds to delete ALL personal settings
and restore to default factory settings.
Support Information
Visit www.comcast.com/skype for
online support.
Call our customer care sta at
877-704-7713 for assistance.
TV
A/V Receiver
OFF
Turn o TV, XFINITY
set-top box and A/V
receiver (if using).
XFINITY Set-Top Box
Messages
Power
3
POWER OFF
On/O Indicator
Glowing LED
indicates
camera is on.
Lens with Shutter
Shutter closes when
camera is o.
Clip
Adjust for
placement.
Microphones Microphones
During setup, you’ll connect to the Internet and create
a Skype on XFINITY profile. Save time and have the
following handy before you begin:
+
Back of Adaptor Box
Modem
Ethernet
cable not
provided
Camera USB
IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
5
CONNECT TO INTERNET
Ethernet: Plug a CAT-6 Ethernet
cable (not provided) into the
Ethernet port on the adaptor box
then plug the other end into your
modem/router.
OR
Wireless: Skip this step and
follow the instructions during
TV activation.
- Comcast ID
- Comcast Password
Your Comcast ID is the username
for your @comcast.net email address.
Visit https://customer.comcast.com
if you don’t know your Comcast ID.
Comcast Account
- Skype Name
- Skype Password
Don’t have a Skype account?
Create one during activation.
Skype Account
For wireless connections
If using a wireless network, you’ll need your Network Name (SSID) and Password (Key).
For your Skype on XFINITY profile =
Remote
2
GATHER INFORMATION
1
CHECK THE BOX
ADAPTOR BOX DETAILS CAMERA DETAILS
4
PLUG IN POWER CABLE
Connect the power cable to the
adaptor box and plug in to an
electrical outlet.
THIS ADAPTOR BOX DOES NOT
HAVE AN ON/OFF BUTTON.
PLUGGING IT IN (AND OUT) IS
HOW YOU WILL TURN THE
SYSTEM ON AND OFF.
Power Adaptor
Camera USB IRAudio
Ethernet
Reset
Power
HDMI
HDMI
Cable In
HDMI
TV Out
HDMI
Back of Adaptor Box
Network Messages Power
SD Card
Adaptor Box
Camera with Clip
Power Cable HDMI Cable (2x)
Note: You may not need both HDMI
cables if you already have one in use.
Power Adaptor USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
Open Me First
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Network Messages Power
SD Card
WPS
Use for wireless setup with
WPS capable routers.
(Currently not available)
SD Slot
Use for viewing media
Message Indicator
Glowing LED indicates
new messages.
Network Indicator
Glowing LED
indicates connection
to home network.
Power
Glowing LED indicates
adaptor is on.
HDMI
Cable In
HDMI
TV Out
USB/IR Power
Ethernet Camera Audio
Back
Front Top
WPS
Keep for future reference, but if you decide to toss, please recycle.
Getting Started Guide v.3.1.3
Printed in China
Reset
Insert a thin object to hold the internal Reset button for
desired result:
Normal Reset
Hold for 2-5 seconds to reboot and keep personal settings.
Factory Reset
Hold for at least 15 seconds to delete ALL personal settings
and restore to default factory settings.
Support Information
Visit www.comcast.com/skype for
online support.
Call our customer care sta at
877-704-7713 for assistance.
TV
A/V Receiver
OFF
Turn o TV, XFINITY
set-top box and A/V
receiver (if using).
XFINITY Set-Top Box
Messages
Power
3
POWER OFF
On/O Indicator
Glowing LED
indicates
camera is on.
Lens with Shutter
Shutter closes when
camera is o.
Clip
Adjust for
placement.
Microphones Microphones
During setup, you’ll connect to the Internet and create
a Skype on XFINITY profile. Save time and have the
following handy before you begin:
+
Back of Adaptor Box
Modem
Ethernet
cable not
provided
Camera USB
IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
5
CONNECT TO INTERNET
Ethernet: Plug a CAT-6 Ethernet
cable (not provided) into the
Ethernet port on the adaptor box
then plug the other end into your
modem/router.
OR
Wireless: Skip this step and
follow the instructions during
TV activation.
- Comcast ID
- Comcast Password
Your Comcast ID is the username
for your @comcast.net email address.
Visit https://customer.comcast.com
if you don’t know your Comcast ID.
Comcast Account
- Skype Name
- Skype Password
Don’t have a Skype account?
Create one during activation.
Skype Account
For wireless connections
If using a wireless network, you’ll need your Network Name (SSID) and Password (Key).
For your Skype on XFINITY profile =
Remote
2
GATHER INFORMATION
1
CHECK THE BOX
ADAPTOR BOX DETAILS CAMERA DETAILS
4
PLUG IN POWER CABLE
Connect the power cable to the
adaptor box and plug in to an
electrical outlet.
THIS ADAPTOR BOX DOES NOT
HAVE AN ON/OFF BUTTON.
PLUGGING IT IN (AND OUT) IS
HOW YOU WILL TURN THE
SYSTEM ON AND OFF.
Power Adaptor
Camera USB IRAudio
Ethernet
Reset
Power
HDMI
HDMI
Cable In
HDMI
TV Out
HDMI
Back of Adaptor Box
Network Messages Power
SD Card
Adaptor Box
Camera with Clip
Power Cable HDMI Cable (2x)
Note: You may not need both HDMI
cables if you already have one in use.
Power Adaptor USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
Open Me First
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Network Messages Power
SD Card
WPS
Use for wireless setup with
WPS capable routers.
(Currently not available)
SD Slot
Use for viewing media
Message Indicator
Glowing LED indicates
new messages.
Network Indicator
Glowing LED
indicates connection
to home network.
Power
Glowing LED indicates
adaptor is on.
HDMI
Cable In
HDMI
TV Out
USB/IR Power
Ethernet Camera Audio
Back
Front Top
WPS
Keep for future reference, but if you decide to toss, please recycle.
Getting Started Guide v.3.1.3
Printed in China
Reset
Insert a thin object to hold the internal Reset button for
desired result:
Normal Reset
Hold for 2-5 seconds to reboot and keep personal settings.
Factory Reset
Hold for at least 15 seconds to delete ALL personal settings
and restore to default factory settings.
Support Information
Visit www.comcast.com/skype for
online support.
Call our customer care sta at
877-704-7713 for assistance.
TV
A/V Receiver
OFF
Turn o TV, XFINITY
set-top box and A/V
receiver (if using).
XFINITY Set-Top Box
Messages
Power
3
POWER OFF
On/O Indicator
Glowing LED
indicates
camera is on.
Lens with Shutter
Shutter closes when
camera is o.
Clip
Adjust for
placement.
Microphones Microphones
During setup, you’ll connect to the Internet and create
a Skype on XFINITY profile. Save time and have the
following handy before you begin:
+
Back of Adaptor Box
Modem
Ethernet
cable not
provided
Camera USB
IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
5
CONNECT TO INTERNET
Ethernet: Plug a CAT-6 Ethernet
cable (not provided) into the
Ethernet port on the adaptor box
then plug the other end into your
modem/router.
OR
Wireless: Skip this step and
follow the instructions during
TV activation.
- Comcast ID
- Comcast Password
Your Comcast ID is the username
for your @comcast.net email address.
Visit https://customer.comcast.com
if you don’t know your Comcast ID.
Comcast Account
- Skype Name
- Skype Password
Don’t have a Skype account?
Create one during activation.
Skype Account
For wireless connections
If using a wireless network, you’ll need your Network Name (SSID) and Password (Key).
For your Skype on XFINITY profile =
Remote
2
GATHER INFORMATION
1
CHECK THE BOX
ADAPTOR BOX DETAILS CAMERA DETAILS
4
PLUG IN POWER CABLE
Activate
• Turn on your TV, A/V receiver (if using) and XFINITY
set-top box, then select the HDMI input for adaptor box.
• Wait for Welcome screen. This may take up 20 minutes.
• If no progress after 20 minutes, unplug/re-plug device or
call 1-800-XFINITY.
Onscreen Setup
• Remove tab from remote’s battery compartment.
• Check that keyboard is unlocked.
• Skype on XFINITY profile = Comcast Account + Skype Account
Connect
• Already have contacts: Click Contacts to select someone to
call or message.
• Don't have contacts: Click Contacts to add someone.
Once a contact request is accepted, select to call or message.
Welcome
Setup Hi you!
Contacts
Flat SurfaceTV Top
Back of TV
OR
Pivot to Position
Back of Adaptor Box
Camera
Camera
USB IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
If needed, use the USB extension cable (provided) during placement, then
plug the camera cable into the adaptor box. The camera should not be
used near strong magnetic fields.
Important Note for Wall-Mounted TVs
Ensure that the combined weight of the camera (8.81 oz.) and TV do not exceed your wall mount’s maximum rating. The camera
clip is not compatible with all TV wall mounts. For wall-mounted TVs that have been installed flush with the wall, camera
placement on your TV is not recommended due to space constraints which may result in damage to your TV or the camera.
Important Note for Fireplace-Mounted TVs
The camera is not intended for use in high-temperature locations, such as above fireplaces.
ON
Connect an HDMI cable from
your TV to your adaptor box.
Use a second HDMI cable to
connect the adaptor box to
your XFINITY set-top box.
XFINITY
Set-Top Box
Back of Adaptor Box
TV
Messages
Power
XFINITY
Set-Top Box
A/V Receiver
Connect an HDMI cable from
your TV to the adaptor box.
Use another HDMI cable to
connect the adaptor box to
your A/V receiver.
Connect a third HDMI cable
from your A/V receiver to
your XFINITY set-top box.
If you don’t have an A/V
receiver, use the HDMI cable to
connect your adaptor box
directly to your XFINITY
set-top box.
If using SPDIF (optical digital
audio) cable
Disconnect this cable from
your XFINITY set-top box and
plug it into the Audio port on
the adaptor box.
For optimal performance, use
both HDMI and SPDIF cables
to connect the adaptor box to
your A/V receiver.
Back of Adaptor Box
XFINITY
Set-Top Box
Adaptor Box
A/V Receiver
Camera
HDMI
HDMIHDMI
SPDIF OPTICAL DIGITAL AUDIO
HDMI
CAMERA USB
Messages
Power
TV
Camera USB IRAudioEthernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
Without an A/V Receiver With an A/V Receiver
Network Messages Power
SD Card
Messages
Power
Camera USB IRAudioEthernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
REMOTE DETAILS
Front Back
Key Lock
Press to prevent accidental typing while using the front of the remote.
If your remote keyboard is not working, it might be locked. Press the Key
Lock button to unlock it. When you’re typing, the LED to the left of the
Key Lock button will flash green with each keystroke. If the remote is
locked the Key Lock button will flash red with each keystroke.
Battery
compartment
CAPS
Press then release ALT for
characters in blue. You will
need to press/release CAPS
for each character.
ALT
Press then release ALT
blue. You will need to
press/release ALT for
each character.
Remove tab from
battery compartment
before use.
Share
Rewind/Play/
Pause/Forward
Not available at this time.
Setup
Use to pair remote.
If remote becomes unpaired,
press and hold Setup, then
press Call to pair again. Also
use to program other functions
such as controlling TV.
Note:
You can use this remote to turn on
your TV and A/V receiver and adjust
volume. Visit xfinity.com/remotes to
access the XR3 Remote Control User
Guide for more information.
Visit xfinity.com/remotes to
use your remote to control
your TV and
A/V receiver.
Navigate Home
Close and return to TV
Switch profiles
End call and ignore
incoming call
Zoom self-view
Turn your video camera
on/off
Change screen layout
Place call on hold,
mute mic and pause
camera
Mute your microphone
Accept incoming calls and
access contacts
Go back to previous
screen
Navigate and select
current option
Mute call
6
CONNECT TO YOUR TV
7
POSITION AND CONNECT CAMERA
8
ACTIVATE THEN CONNECT WITH FAMILY AND FRIENDS
Need assistance with a more
advanced setup? Call 1-800-XFINITY.
Activate
• Turn on your TV, A/V receiver (if using) and XFINITY
set-top box, then select the HDMI input for adaptor box.
• Wait for Welcome screen. This may take up 20 minutes.
• If no progress after 20 minutes, unplug/re-plug device or
call 1-800-XFINITY.
Onscreen Setup
• Remove tab from remote’s battery compartment.
• Check that keyboard is unlocked.
• Skype on XFINITY profile = Comcast Account + Skype Account
Connect
• Already have contacts: Click Contacts to select someone to
call or message.
• Don't have contacts: Click Contacts to add someone.
Once a contact request is accepted, select to call or message.
Welcome
Setup Hi you!
Contacts
Flat SurfaceTV Top
Back of TV
OR
Pivot to Position
Back of Adaptor Box
Camera
Camera
USB IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
If needed, use the USB extension cable (provided) during placement, then
plug the camera cable into the adaptor box. The camera should not be
used near strong magnetic fields.
Important Note for Wall-Mounted TVs
Ensure that the combined weight of the camera (8.81 oz.) and TV do not exceed your wall mount’s maximum rating. The camera
clip is not compatible with all TV wall mounts. For wall-mounted TVs that have been installed flush with the wall, camera
placement on your TV is not recommended due to space constraints which may result in damage to your TV or the camera.
Important Note for Fireplace-Mounted TVs
The camera is not intended for use in high-temperature locations, such as above fireplaces.
ON
Connect an HDMI cable from
your TV to your adaptor box.
Use a second HDMI cable to
connect the adaptor box to
your XFINITY set-top box.
XFINITY
Set-Top Box
Back of Adaptor Box
TV
Messages
Power
XFINITY
Set-Top Box
A/V Receiver
Connect an HDMI cable from
your TV to the adaptor box.
Use another HDMI cable to
connect the adaptor box to
your A/V receiver.
Connect a third HDMI cable
from your A/V receiver to
your XFINITY set-top box.
If you don’t have an A/V
receiver, use the HDMI cable to
connect your adaptor box
directly to your XFINITY
set-top box.
If using SPDIF (optical digital
audio) cable
Disconnect this cable from
your XFINITY set-top box and
plug it into the Audio port on
the adaptor box.
For optimal performance, use
both HDMI and SPDIF cables
to connect the adaptor box to
your A/V receiver.
Back of Adaptor Box
XFINITY
Set-Top Box
Adaptor Box
A/V Receiver
Camera
HDMI
HDMIHDMI
SPDIF OPTICAL DIGITAL AUDIO
HDMI
CAMERA USB
Messages
Power
TV
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Without an A/V Receiver With an A/V Receiver
Network Messages Power
SD Card
Messages
Power
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
REMOTE DETAILS
Front Back
Key Lock
Press to prevent accidental typing while using the front of the remote.
If your remote keyboard is not working, it might be locked. Press the Key
Lock button to unlock it. When you’re typing, the LED to the left of the
Key Lock button will flash green with each keystroke. If the remote is
locked the Key Lock button will flash red with each keystroke.
Battery
compartment
CAPS
Press then release ALT for
characters in blue. You will
need to press/release CAPS
for each character.
ALT
Press then release ALT
blue. You will need to
press/release ALT for
each character.
Remove tab from
battery compartment
before use.
Share
Rewind/Play/
Pause/Forward
Not available at this time.
Setup
Use to pair remote.
If remote becomes unpaired,
press and hold Setup, then
press Call to pair again. Also
use to program other functions
such as controlling TV.
Note:
You can use this remote to turn on
your TV and A/V receiver and adjust
volume. Visit xfinity.com/remotes to
access the XR3 Remote Control User
Guide for more information.
Visit xfinity.com/remotes to
use your remote to control
your TV and
A/V receiver.
Navigate Home
Close and return to TV
Switch profiles
End call and ignore
incoming call
Zoom self-view
Turn your video camera
on/off
Change screen layout
Place call on hold,
mute mic and pause
camera
Mute your microphone
Accept incoming calls and
access contacts
Go back to previous
screen
Navigate and select
current option
Mute call
6
CONNECT TO YOUR TV
7
POSITION AND CONNECT CAMERA
8
ACTIVATE THEN CONNECT WITH FAMILY AND FRIENDS
Need assistance with a more
advanced setup? Call 1-800-XFINITY.
Activate
• Turn on your TV, A/V receiver (if using) and XFINITY
set-top box, then select the HDMI input for adaptor box.
• Wait for Welcome screen. This may take up 20 minutes.
• If no progress after 20 minutes, unplug/re-plug device or
call 1-800-XFINITY.
Onscreen Setup
• Remove tab from remote’s battery compartment.
• Check that keyboard is unlocked.
• Skype on XFINITY profile = Comcast Account + Skype Account
Connect
• Already have contacts: Click Contacts to select someone to
call or message.
• Don't have contacts: Click Contacts to add someone.
Once a contact request is accepted, select to call or message.
Welcome
Setup Hi you!
Contacts
Flat SurfaceTV Top
Back of TV
OR
Pivot to Position
Back of Adaptor Box
Camera
Camera
USB IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
If needed, use the USB extension cable (provided) during placement, then
plug the camera cable into the adaptor box. The camera should not be
used near strong magnetic fields.
Important Note for Wall-Mounted TVs
Ensure that the combined weight of the camera (8.81 oz.) and TV do not exceed your wall mount’s maximum rating. The camera
clip is not compatible with all TV wall mounts. For wall-mounted TVs that have been installed flush with the wall, camera
placement on your TV is not recommended due to space constraints which may result in damage to your TV or the camera.
Important Note for Fireplace-Mounted TVs
The camera is not intended for use in high-temperature locations, such as above fireplaces.
ON
Connect an HDMI cable from
your TV to your adaptor box.
Use a second HDMI cable to
connect the adaptor box to
your XFINITY set-top box.
XFINITY
Set-Top Box
Back of Adaptor Box
TV
Messages
Power
XFINITY
Set-Top Box
A/V Receiver
Connect an HDMI cable from
your TV to the adaptor box.
Use another HDMI cable to
connect the adaptor box to
your A/V receiver.
Connect a third HDMI cable
from your A/V receiver to
your XFINITY set-top box.
If you don’t have an A/V
receiver, use the HDMI cable to
connect your adaptor box
directly to your XFINITY
set-top box.
If using SPDIF (optical digital
audio) cable
Disconnect this cable from
your XFINITY set-top box and
plug it into the Audio port on
the adaptor box.
For optimal performance, use
both HDMI and SPDIF cables
to connect the adaptor box to
your A/V receiver.
Back of Adaptor Box
XFINITY
Set-Top Box
Adaptor Box
A/V Receiver
Camera
HDMI
HDMIHDMI
SPDIF OPTICAL DIGITAL AUDIO
HDMI
CAMERA USB
Messages
Power
TV
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Without an A/V Receiver With an A/V Receiver
Network Messages Power
SD Card
Messages
Power
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
REMOTE DETAILS
Front Back
Key Lock
Press to prevent accidental typing while using the front of the remote.
If your remote keyboard is not working, it might be locked. Press the Key
Lock button to unlock it. When you’re typing, the LED to the left of the
Key Lock button will flash green with each keystroke. If the remote is
locked the Key Lock button will flash red with each keystroke.
Battery
compartment
CAPS
Press then release ALT for
characters in blue. You will
need to press/release CAPS
for each character.
ALT
Press then release ALT
blue. You will need to
press/release ALT for
each character.
Remove tab from
battery compartment
before use.
Share
Rewind/Play/
Pause/Forward
Not available at this time.
Setup
Use to pair remote.
If remote becomes unpaired,
press and hold Setup, then
press Call to pair again. Also
use to program other functions
such as controlling TV.
Note:
You can use this remote to turn on
your TV and A/V receiver and adjust
volume. Visit xfinity.com/remotes to
access the XR3 Remote Control User
Guide for more information.
Visit xfinity.com/remotes to
use your remote to control
your TV and
A/V receiver.
Navigate Home
Close and return to TV
Switch profiles
End call and ignore
incoming call
Zoom self-view
Turn your video camera
on/off
Change screen layout
Place call on hold,
mute mic and pause
camera
Mute your microphone
Accept incoming calls and
access contacts
Go back to previous
screen
Navigate and select
current option
Mute call
6
CONNECT TO YOUR TV
7
POSITION AND CONNECT CAMERA
8
ACTIVATE THEN CONNECT WITH FAMILY AND FRIENDS
Need assistance with a more
advanced setup? Call 1-800-XFINITY.
Activate
• Turn on your TV, A/V receiver (if using) and XFINITY
set-top box, then select the HDMI input for adaptor box.
• Wait for Welcome screen. This may take up 20 minutes.
• If no progress after 20 minutes, unplug/re-plug device or
call 1-800-XFINITY.
Onscreen Setup
• Remove tab from remote’s battery compartment.
• Check that keyboard is unlocked.
• Skype on XFINITY profile = Comcast Account + Skype Account
Connect
• Already have contacts: Click Contacts to select someone to
call or message.
• Don't have contacts: Click Contacts to add someone.
Once a contact request is accepted, select to call or message.
Welcome
Setup Hi you!
Contacts
Flat SurfaceTV Top
Back of TV
OR
Pivot to Position
Back of Adaptor Box
Camera
Camera
USB IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
If needed, use the USB extension cable (provided) during placement, then
plug the camera cable into the adaptor box. The camera should not be
used near strong magnetic fields.
Important Note for Wall-Mounted TVs
Ensure that the combined weight of the camera (8.81 oz.) and TV do not exceed your wall mount’s maximum rating. The camera
clip is not compatible with all TV wall mounts. For wall-mounted TVs that have been installed flush with the wall, camera
placement on your TV is not recommended due to space constraints which may result in damage to your TV or the camera.
Important Note for Fireplace-Mounted TVs
The camera is not intended for use in high-temperature locations, such as above fireplaces.
ON
Connect an HDMI cable from
your TV to your adaptor box.
Use a second HDMI cable to
connect the adaptor box to
your XFINITY set-top box.
XFINITY
Set-Top Box
Back of Adaptor Box
TV
Messages
Power
XFINITY
Set-Top Box
A/V Receiver
Connect an HDMI cable from
your TV to the adaptor box.
Use another HDMI cable to
connect the adaptor box to
your A/V receiver.
Connect a third HDMI cable
from your A/V receiver to
your XFINITY set-top box.
If you don’t have an A/V
receiver, use the HDMI cable to
connect your adaptor box
directly to your XFINITY
set-top box.
If using SPDIF (optical digital
audio) cable
Disconnect this cable from
your XFINITY set-top box and
plug it into the Audio port on
the adaptor box.
For optimal performance, use
both HDMI and SPDIF cables
to connect the adaptor box to
your A/V receiver.
Back of Adaptor Box
XFINITY
Set-Top Box
Adaptor Box
A/V Receiver
Camera
HDMI
HDMIHDMI
SPDIF OPTICAL DIGITAL AUDIO
HDMI
CAMERA USB
Messages
Power
TV
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Without an A/V Receiver With an A/V Receiver
Network Messages Power
SD Card
Messages
Power
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
REMOTE DETAILS
Front Back
Key Lock
Press to prevent accidental typing while using the front of the remote.
If your remote keyboard is not working, it might be locked. Press the Key
Lock button to unlock it. When you’re typing, the LED to the left of the
Key Lock button will flash green with each keystroke. If the remote is
locked the Key Lock button will flash red with each keystroke.
Battery
compartment
CAPS
Press then release ALT for
characters in blue. You will
need to press/release CAPS
for each character.
ALT
Press then release ALT
blue. You will need to
press/release ALT for
each character.
Remove tab from
battery compartment
before use.
Share
Rewind/Play/
Pause/Forward
Not available at this time.
Setup
Use to pair remote.
If remote becomes unpaired,
press and hold Setup, then
press Call to pair again. Also
use to program other functions
such as controlling TV.
Note:
You can use this remote to turn on
your TV and A/V receiver and adjust
volume. Visit xfinity.com/remotes to
access the XR3 Remote Control User
Guide for more information.
Visit xfinity.com/remotes to
use your remote to control
your TV and
A/V receiver.
Navigate Home
Close and return to TV
Switch profiles
End call and ignore
incoming call
Zoom self-view
Turn your video camera
on/off
Change screen layout
Place call on hold,
mute mic and pause
camera
Mute your microphone
Accept incoming calls and
access contacts
Go back to previous
screen
Navigate and select
current option
Mute call
6
CONNECT TO YOUR TV
7
POSITION AND CONNECT CAMERA
8
ACTIVATE THEN CONNECT WITH FAMILY AND FRIENDS
Need assistance with a more
advanced setup? Call 1-800-XFINITY.
Connect the power cable to the
adaptor box and plug in to an
electrical outlet.
THIS ADAPTOR BOX DOES NOT
HAVE AN ON/OFF BUTTON.
PLUGGING IT IN (AND OUT) IS
HOW YOU WILL TURN THE
SYSTEM ON AND OFF.
Power Adaptor
Camera USB IRAudio
Ethernet
Reset
Power
HDMI
HDMI
Cable In
HDMI
TV Out
HDMI
Back of Adaptor Box
Network Messages Power
SD Card
Adaptor Box
Camera with Clip
Power Cable HDMI Cable (2x)
Note: You may not need both HDMI
cables if you already have one in use.
Power Adaptor USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
Open Me First
Camera USB IRAudioEthernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
Network Messages Power
SD Card
WPS
Use for wireless setup with
WPS capable routers.
(Currently not available)
SD Slot
Use for viewing media
Message Indicator
Glowing LED indicates
new messages.
Network Indicator
Glowing LED
indicates connection
to home network.
Power
Glowing LED indicates
adaptor is on.
HDMI
Cable In
HDMI
TV Out
USB/IR
Power
Ethernet Camera Audio
Back
Front Top
WPS
Keep for future reference, but if you decide to toss, please recycle.
Getting Started Guide v.3.1.3
Printed in China
Reset
Insert a thin object to hold the internal Reset button for
desired result:
Normal Reset
Hold for 2-5 seconds to reboot and keep personal settings.
Factory Reset
Hold for at least 15 seconds to delete ALL personal settings
and restore to default factory settings.
Support Information
Visit www.comcast.com/skype for
online support.
Call our customer care sta at
877-704-7713 for assistance.
TV
A/V Receiver
OFF
Turn o TV, XFINITY
set-top box and A/V
receiver (if using).
XFINITY Set-Top Box
Messages
Power
3
POWER OFF
On/O Indicator
Glowing LED
indicates
camera is on.
Lens with Shutter
Shutter closes when
camera is o.
Clip
Adjust for
placement.
Microphones Microphones
During setup, you’ll connect to the Internet and create
a Skype on XFINITY profile. Save time and have the
following handy before you begin:
+
Back of Adaptor Box
Modem
Ethernet
cable not
provided
Camera USB
IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
5
CONNECT TO INTERNET
Ethernet: Plug a CAT-6 Ethernet
cable (not provided) into the
Ethernet port on the adaptor box
then plug the other end into your
modem/router.
OR
Wireless: Skip this step and
follow the instructions during
TV activation.
- Comcast ID
- Comcast Password
Your Comcast ID is the username
for your @comcast.net email address.
Visit https://customer.comcast.com
if you don’t know your Comcast ID.
Comcast Account
- Skype Name
- Skype Password
Don’t have a Skype account?
Create one during activation.
Skype Account
For wireless connections
If using a wireless network, you’ll need your Network Name (SSID) and Password (Key).
For your Skype on XFINITY profile =
Remote
2
GATHER INFORMATION
1
CHECK THE BOX
ADAPTOR BOX DETAILS CAMERA DETAILS
4
PLUG IN POWER CABLE
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Comcast Conference System Getting Started Manual
- Type
- Getting Started Manual
- This manual is also suitable for
Comcast Conference System is a cutting-edge solution for seamless communication and collaboration. This system boasts an array of features designed to enhance your conferencing experience:
-
Exceptional Video Conferencing: Engage in crystal-clear video calls with up to four participants simultaneously. The high-quality camera captures sharp and vibrant images, ensuring everyone is seen and heard with clarity.
-
Immersive Audio Experience: Experience lifelike audio with the built-in microphone and speaker system. Noise cancellation technology minimizes background noise, providing a distraction-free environment for effective communication.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Comcast Xfinity User manual
-
Comcast HOW4319 Getting Started Manual
-
-
-
-
-
Comcast Xfinity Internet 2go User manual
-
Comcast Xfinity Internet 2go User manual
-
Comcast X1 Getting Started Manual
-
Comcast X1 Entertainment Operating System Installation Instructions Manual
Other documents
-
Motorola MT7711 User manual
-
Netgear C7100V-1AZNAS User guide
-
COX Netgear C6250 User manual
-
COX Nighthawk C7000 User manual
-
Arris 1000895-RB User manual
-
-
Netgear C6300 User manual
-
-
-
Netgear CM500 User manual