ABB ABB-Welcome User manual

Brand: ABB

Model: ABB-Welcome

Type: User manual

This manual is also suitable for

0073-1-7523 │ │ 14.11.2012

ABB-Welcome

Pos: 2 /DinA4 - Anleitunge n Online/Inhalt/K NX/DoorEntry/83300/ Titelblatt - 83300 - ABB @ 19\mod_ 1323173449723_15.doc x @ 110999 @ @ 1

83300-500

83300

-515

System controller

=== Ende der Liste für Textmarke Cover ===

ABB-Welcome

| 0073-1-7523

— 2 —

Pos: 4 /Busch-J aeger (Neustruktur)/Modul-S truktur/Online-D okumentation/I nhaltsverzeichnis ( --> Für alle Dokumente <--)/Inhaltsver zeichnis @ 19\mod_13206 49044386_15.doc x @ 109653 @ @ 1

1 Safety ....................................................................................................................................................................... 3

2 Intended use ............................................................................................................................................................ 3

3 Environment ............................................................................................................................................................. 3

3.1 ABB devices ............................................................................................................................................ 3

4 User Manual............................................................................................................................................................. 3

5 Operation ................................................................................................................................................................. 4

5.1 Standard operation ................................................................................................................................. 4

6 Technical data.......................................................................................................................................................... 5

7 Mounting / Installation .............................................................................................................................................. 6

7.1 Requirements for the electrician ............................................................................................................. 6

7.2 General installation instructions .............................................................................................................. 6

7.3 Mounting ................................................................................................................................................. 7

7.4 Connection .............................................................................................................................................. 7

=== Ende der Liste für Textmarke TOC ===

ABB-Welcome

Safety

| 0073-1-7523

— 3 —

Pos: 6 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Doku mentation/Übersc hriften (--> Für alle Dokumente <--) /1. Ebene/S - T/Sicher heit @ 18\mod_1302612791790_1 5.docx @ 103357 @ 1 @ 1

1 Safety

Pos: 7 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Doku mentation/Sic herheit (--> Für alle Dokumente <--) /Warnhinweise/Sic herheit - 230 V @ 18\mod_130260681 6750_15.docx @ 103308 @ @ 1

Warning

Electric voltage!

Risk of death and fire due to electrical voltage of 230 V.

– Work on the 230V supply system may only be performed by authorised electricians!

– Disconnect the mains power supply prior to installation and/or disassembly!

Pos: 8 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Doku mentation/Übersc hriften (--> Für alle Dokumente < --)/1. Ebene/A - F/Bestimmungsge mäßer Gebrauch @ 18\mod_130 2763321316_15.doc x @ 103483 @ 1 @ 1

2 Intended use

Pos: 9 /DinA4 - Anleitunge n Online/Inhalt/K NX/DoorEntry/83300/ Bestimmungsgemaesser Gebrauch - 83300-500 @ 19\mod_13 23173289184_15. docx @ 110990 @ @ 1

The 83300-500 system controller is an integral part of the ABB-Welcome door communication system and

operates exclusively with components from this system. The device must only be installed on mounting rails

according to DIN EN 500022.

Pos: 10 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Übersc hriften (--> Für alle Dokument e <--)/1. Ebene/U - Z/U mwel t @ 18\mod_130 2614158967_15.doc x @ 103383 @ 1 @ 1

3 Environment

Pos: 11 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Umwel t (--> Für alle Dokumente <--)/ Hinwei se/ Hinwe is - Umwelt - Hinwei s Elektrogeräte @ 18\mod_130 2763973434_15.doc x @ 103500 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with domestic waste.

– The device contains valuable raw materials which can be recycled. Therefore, dispose of the

device at the appropriate collecting depot.

Pos: 12 /DinA4 - Anleitung en Online/Ueberschr iften/2./ABB Geraete @ 19\ mod_1323162843832_1 5.docx @ 110875 @ 2 @ 1

3.1 ABB devices

Pos: 13 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online- Dokumentation/ Umwelt (--> Für alle Dokumente <--) /Hinwe ise/ Hin weis - Umwelt - ABB Elektrogeräte @ 19\mod_132 3162745839_15.doc x @ 110867 @ @ 1

All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always

dispose of the packaging material and electric devices and their components via the authorized collecting depots

and disposal companies.

ABB products meet the legal requirements, in particular the laws governing electronic and electrical devices and

the REACH ordinance.

(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Pos: 14 /DinA4 - Anleitung en Online/Ueberschriften/ 1./Anwenderhandbuch @ 19\mod_1309347227593_1 5.docx @ 107473 @ 1 @ 1

4 User Manual

Pos: 15 /DinA4 - Anleitung en Online/Inhalt/KNX/DoorEn try/Systemhandbuch/ Anwenderhandbuch - ABB @ 19\mod_13231631 57997_15.docx @ 110883 @ @ 1

Detailed information for planning ABB-Welcome systems is contained in the user manual. Download at

www.Busch-Jaeger.com.

Pos: 16 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Ste uermodule - Onl ine-Dok umentation (--> Für alle Doku mente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1

ABB-Welcome

Operation

| 0073-1-7523

— 4 —

Pos: 17 /DinA4 - Anleitung en Online/Ueberschr iften/1./Bedienun g @ 18\mod_1302613924165_ 15.docx @ 103365 @ 1 @ 1

5 Operation

Pos: 18 /DinA4 - Anleitung en Online/Uebersc hriften/2./Nor maler Betrieb @ 18\mod_13027 68820965_15.docx @ 1035 40 @ 2 @ 1

5.1 Standard operation

Pos: 19 /DinA4 - Anleitung en Online/Inhalt/KNX/DoorEn try/83300/Bedienung - 83300 @ 18\m od_1303215078133_1 5.docx @ 103730 @ @ 1

Fig. 1:

No.

Function

Setting the duration for the door opener

– When activated, the door can be opened during the period from 1 second to 10 seconds, depending on

the setting.

Setting the duration of the lighting

– When activated, the lighting remains on for 1 second to 5 minutes, depending on the setting.

Status LED

The status LED lights up permanently = the device is operating

The status LED flashes slowly = the device is operating

The status LED flashes fast = there is an error

Floating output of door opener

Power supply of door opener

• Connection for the outdoor station

• When using several outdoor stations: connection for the external bus

• Connection for the indoor station

• When using several indoor stations: connection for the internal bus

Floating output for the light

Power supply

Pos: 20 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Ste uermodule - Onl ine-Dok umentation (--> Für alle Doku mente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1

ABB-Welcome

Technical data

| 0073-1-7523

— 5 —

Pos: 21 /DinA4 - Anleitung en Online/Ueberschr iften/1./Technisc he Daten @ 18\mod_1302615 863001_15.docx @ 103416 @ 1 @ 1

6 Technical data

Pos: 22 /DinA4 - Anleitung en Online/Inhalt/K NX/DoorEntry/83300/ Technische Daten - 83300 @ 18\mod_1303215079179 _15.docx @ 103762 @ @ 1

Designation

Value

Operating temperature

-5℃ to +45℃

Storage temperature

-20°C – +70°C

Protection

IP 20

Single-wire clamps

2 x 0.6 mm² – 2 x 1 mm²

Fine-wire clamps

2 x 0.6 mm² – 2 x 0.75 mm²

Volume

Maximum 80 dB

Mains voltage

100-240 V, 50 / 60 Hz, 0.9 A

Power supply for door opener

12 V~; 1.6 A

Floating output for door opener

30 V AC/DC; 3 A

Floating output for light

230 V~; 3 AX

Bus voltage

28 V- ±2 V, 1.5 A

Size

12 TE

Pos: 23 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Ste uermodule - Onl ine-Dok umentation (--> Für alle Doku mente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1

ABB-Welcome

Mounting / Installation

| 0073-1-7523

— 6 —

Pos: 24 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Übersc hriften (--> Für alle Dokument e <--)/1. Ebene/M - O/Montage / I nstallation @ 18\mod_1302 613966111_15.docx @ 103373 @ 1 @ 1

7 Mounting / Installation

Pos: 25 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Sic herheit (--> Für alle Dokumente < --)/Warnhinweise/Sicher heit - Niederspannun gs- und 230 V-Leitungen @ 18\mod_1 302617821491_15.doc x @ 103465 @ @ 1

Warning

Electric voltage!

Risk of death and fire due to electrical voltage of 230 V.

– Low-voltage and 230 V cables must not be installed together in a flush-mounted socket!

In case of a short-circuit there is the danger of a 230 V load on the low-voltage line.

Pos: 26 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Sic herheit (--> Für alle Dokumente < --)/Warnhinweise/Sicher heit - Fachkenntnisse @ 18\mod_1302774384017_15. docx @ 103564 @ 2 @ 1

7.1 Requirements for the electrician

Warning

Electric voltage!

Install the device only if you have the necessary electrical engineering knowledge and experience.

• Incorrect installation endangers your life and that of the user of the electrical system.

• Incorrect installation can cause serious damage to property, e.g. due to fire.

The minimum necessary expert knowledge and requirements for the installation are as follows:

• Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect from power;

2. Secure against being re-connected;

3. Ensure there is no voltage;

4. Connect to earth;

5. Cover or barricade adjacent live parts.

• Use suitable personal protective clothing.

• Use only suitable tools and measuring devices.

• Check the type supply network (TN system, IT system, TT system) to secure the following

power supply conditions (classic connection to ground, protective earthing, necessary

additional measures, etc.).

Pos: 27 /DinA4 - Anleitung en Online/Inhalt/KNX/DoorEn try/Montage/Montagehi nweise - Allgemei n @ 19\mod_1310563670478_15. docx @ 107743 @ 2 @ 1

7.2 General installation instructions

• Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station,

system device).

• Do not install the system controller directly next to the bell transformer and other power supplies (to avoid

interference).

• Do not install the wires of the system bus together with 230 V wires.

• Do not use common cables for the connecting wires of the door openers and wires of the system bus.

• Avoid bridges between different cable types.

• Use only two wires for the system bus in a four-core or multi-core cable.

• When looping, never install the incoming and outgoing bus inside the same cable.

• Never install the internal and external bus inside the same cable.

Pos: 28 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Ste uermodule - Onl ine-Dok umentation (--> Für alle Doku mente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1

ABB-Welcome

Mounting / Installation

| 0073-1-7523

— 7 —

Pos: 29 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Übersc hriften (--> Für alle Dokument e <--)/2. Ebene/M - O/Montage @ 18\mod _1302615960458_15.doc x @ 103424 @ 2 @ 1

7.3 Mounting

Pos: 30 /DinA4 - Anleitung en Online/Inhalt - Montage/Montage - Hutsc hienen nach DIN EN 500022 @ 18\mo d_1303218164750_15.doc x @ 103868 @ @ 1

The device 83300-500 must only be installed on mounting rails according to DIN EN 500022.

Pos: 31 /DinA4 - Anleitung en Online/Ueberschr iften/2./Anschlu ss @ 18\mod_1302617573351 _15.docx @ 103449 @ 2 @ 1

7.4 Connection

Pos: 32 /DinA4 - Anleitung en Online/Inhalt/KNX/DoorEn try/83300/Anschluss - 83300 @ 18\ mod_1303215077836_ 15.docx @ 103722 @ @ 1

Fig. 2:

No.

Function

Floating output of door opener

Power supply of door opener

• Connection for the outdoor station

• When using several outdoor stations: connection for the external bus

• Connection for the indoor station

• When using several indoor stations: connection for the internal bus

Floating output for the light

Power supply

Pos: 33.1 /DinA4 - Anlei tungen Online/Inhalt/KNX/Door Entry/Video-Module/Ei nleitungen/Ei nleitung - Montage und Ansc hluss des Geraetes @ 20\mod_ 1324553399047_15.doc x @ 112597 @ @ 1

ABB-Welcome

Mounting / Installation

| 0073-1-7523

— 8 —

Video for mounting and connecting the device

Pos: 33.2 /DinA4 - Anlei tungen Online/Inhalt/KNX/Door Entry/Video-Module/Vi deos/Sprachneutral/V ideo Montage - Systemzentrale - Montage- Anschluss @ 21\mod_1329 750340730_0.docx @ 1987 59 @ @ 1

=== Ende der Liste für Textmarke Content ===

ABB-Welcome

0073-1-7523 | | 14.11.2012

Pos: 35 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Rüc kseiten (--> Für alle Dokumente <--) /Rückseite - Busch-J aeger - Allgemein @ 20\mod_1327320 074886_15.doc x @ 137103 @ @ 1

member of the ABB Group

Busch

-Jaeger Elektro GmbH

PO box

58505 Lüdenscheid

Freisenbergstraße 2

58513 Lüdenscheid

Germany

www.BUSCH

-JAEGER.com

info.bje@de.abb.com

Central sales service: