2. Garth
  3. Side
Side

Garth Side Operating instructions

  • Hello, I've reviewed the user manual for replacing a fascia. This document provides detailed step-by-step instructions on how to remove the old fascia and install the new one, including specific steps for removing bolts, side shelves, and knobs, and how to connect the new fascia correctly. I'm ready to answer any questions you have about the process.
  • What is the first step in replacing the fascia?
    What should I remove after the bolts?
    What's the key thing to pay attention to when installing the new fascia?
How to replace the fascia
Step 1: Take out the bolts as the picture shows.
Step 2: Take out the side shelf as the picture shows.
Step 3: Pull out the side burner ignition wire.
Step 4: Take out the bolt from the side burner injector bracket.
Step 5: Take out the bolts as the picture shows.
Step 6: Take out the side burner shelf as the picture shows.
Step 7: Take out the bolts as the picture shows (both sides).
Step 8: Take out all the knobs.
Step 9: Remove all screws from the knob bezel.
Step 10: Loosen the ignition box.
Step 11: Replace with a new fascia.
Step 12: Reverse steps above to install the parts back. Please pay attention when
installing the fascia, since each injector on the manifold must aim at the burner
inlets.
/