Master Products VV1235 Operating instructions

Brand: Master Products

Model: VV1235

Type: Operating instructions

This manual is also suitable for

VV1236

Master Products VV1235: A versatile tool for capturing life's moments and unleashing creativity. With its ability to shoot stunning 4K videos, capture crisp 20-megapixel still images, and offer a wide range of manual controls, this advanced camera empowers you to elevate your photography skills and document memories in remarkable detail.

MASTER PAINTS & CHEMICAL CORP. CARR # 127 KM. 12.7 BO. MAGAS. GUAYANILLA PR 00656

Tel: 787-835-4000 / Fax: 787-835-2965 / e-fax: 787-966-7180

Rev. May 05, 2014

Page 1 of 2 Supersedes September 2013

Masterflex® Reflective

Maximum Energy Saving Reflective Roof Sealer

Reflective Mirror Cool Roof Technology

SECTION 1 - PRODUCT DESCRIPTION

SECTION 2 - TYPICAL USE

SECTION 3 - PRODUCT ADVANTAGE

SECTION 4 - COLOR

SECTION 5 - GLOSS

SPEC DATA SHEET

Masterflex® Reflective is an ultra white, high reflective,100% acrylic elastomeric roof sealer, designed for fixing leaks in roofs and walls,

caused by capillarity, cracks or joints when adding new constructions to existing ones. It is a product that is internally plasticized in order to

retain its mechanical properties and its adhesion, even after years of exposure to the sun and the rain. It also contains heat reflective

pigments and additives that provide an excellent, highly protective barrier which reflects the sun’s heat and destructive UV rays. In turn,

this helps to cool surfaces and leads to a reduction of interior home and building temperature, energy savings and cooling costs.

Masterflex® Reflective leaves a brilliant ultra white finish, reducing surface heat absorption up 20°F.

Masterflex® Reflective is used for waterproofing and protection of concrete, wood, roof tiles, galvanized metal (exposed for some time),

asphalt and built up roofs, whit the additional advantage of lowering interior home and building temperature

 Cool Roof Technology provides maximum sun

light reflection resulting in lower room

temperature and energy saving

 Highly reflective finish

 Superfast dry early rain resistance technology

 Maximum UV rays & dirt pick up resistance

 Masterflex Polyfiber Plus® the thickest

technology that guarantees the maximum adhesion

on concrete roofs, wood, asphalt and metal

 Highest water ponding resistance

Brilliant Ultra White finished

Reflective flat finish

SECTION 6 - COMPOSITION

100% elastomeric acrylic resins, titanium dioxide and reflective and inert pigments. Free of lead and, chromates and mercury.

SECTION 7 – PHYSICAL AND CHEMICAL PROPERTIES

Viscosity: 105 – 115KU (Stormer) Flash Point: None

Weight per gallon: (10.60 +/- 0.15) Lbs Solids per Volume: (55+/-1) %

Solids per weight: 65% VOC Content max (grams/liter): 43

 Sealer film is Mold & Mildew Resistant

 Maximum adhesion on concrete roofs, wood, asphalt and

metal

 Higher water pounding resistance without membrane

deterioration eliminating all types of filtration

 100% Acrylic Elastomeric

 2 in 1 Primer and Sealer

 Fiber Reinforced for More Protection, Strength & Durability

 Low VOC

 Complies with ASTM D6083

MASTER PAINTS & CHEMICAL CORP. CARR # 127 KM. 12.7 BO. MAGAS. GUAYANILLA PR 00656

Tel: 787-835-4000 / Fax: 787-835-2965 / e-fax: 787-966-7180

Rev. May 05, 2014

Page 2 of 2 Supersedes September 2013

SECTION 9 - APPLICATION

SECTION 10 – APPLICATION TOOLS

SECTION 11 – CAUTION

SECTION 12 – FIRST AID

SECTION 13 – PACKAGING

1 gallon and 5 gallon pails

The roof or surface should be free from dust, sand, cement, fungus and strange objects. A pressure washer machine is recommended. Before

applying Masterflex® Reflective, improve water drainage where it is necessary and repair areas where standing water last one day or more.

Less severe pounding areas must be re-coated annually with Masterflex® Reflective. This product will resist standing water (for 100 hours).

However, we recommend repairing and correcting excessive pounding water and improperly drained areas for a better and efficient sealing by

using the Leveling Repair from Master. Roof with excessive pounding water and improperly drained areas require annual maintenance,

applying two (2) coats of Masterflex® Reflective.

How to Correct Cracks: Make sure all joints and cracks are sealed with a putty knife by applying Master Elastomeric Crack Filler and the

Master Fiberglass Patching Weave over cracks, seams, flashing and around any standing object, about two inches to both sides and let dry for

24 hours before applying Masterflex®. Apply Master Elastometric Crack Filter with a putty knife. While product is wet, roll out polyester

weave. While product is still wet, apply another coat of Master Elastomeric Crack Filler over the polyester weave.

It can be applied using a thick hair nap roller or airless spray. A brush can be used in small areas.

Airless Machine Procedure: Mix Masterflex® Reflective preferably with a mechanical agitator. Remove the filter from the suction bomb

and the machine’s filter. Program the machine to apply the product with 1,400 to 1,750 psi and use a fan with of 6 to control the material

overspray. Use a gun tip from .29” to .41”. Let dry for 12 hours and for longer durability apply a second coat. If the roof i s too hot, you can

spray it with water to avoid sealer from fast drying. Select a warm, clear sunny day. Make sure there is no forecast of rain. Keep surface

moisture free at least six hours after application.

Before attempting to apply, mix the product well in a circular upward-downward motion, preferably with a mechanical agitator. For a longer

durability, let it dry for 12 hours and then apply a second coat.

Recommended Film Thickness: 20 mils dry / 40 mils wet

Coverage: (One Coat)

Concrete surface: 85 square feet per gallon @ 10 MDFT/ 425square feet per pail @ 10 MDTF

Metal Surface: 170 square feet per gallon @ 5 MDTF/ 850 square feet per pail @ 5 MDTF

Wood Surface: 85 square feet per gallon @ 10 MDTF/ 425square feet per pail @ 10 MDTF

Built- up roofs: 42 square feet per gallon @ 20 MDTF/ 210 square feet per pail @ 20 MDTF

This sealer contains acrylic resins. It can cause eye, skin, or throat irritation. Do not take internally. Close container after each use. When

spray applying, use respiratory protection (NIOSH/MSHA TC23C or equivalent), eye protection and protective clothing. For more information

read the MSDS, available at Master paints and Chemical Corp. KEEP OUT OF REACH OF CHILDREN

In case of skin contact, flush from skin with water and then wash thoroughly with soap and water. In case of eye contact, flush immediately

with large amounts of water for at least 15 minutes and get emergency medical attention. If swallowed, get medical attention immediately. For

more information, request Material Safety Data Sheet of the product available at Master Paints & Chemical Corp.

SECTION 8 – SURFACE PREPARATION

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD

DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT

WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH approved respirator and prevent skin contact to control

lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you star, find out how to protect yourself and your family by

contacting the USEPA National lead Information Hotline at 1-800-424 LEAD or log on to www.epa.gov/lead.

Two coats must be applied in order to get the recommended dry film thickness (MDTF).

Thinning: Not recommended.

Dry time: 1-2 hours to touch / 12 hours to recoat

The information and recommendations set forth in this Product Data Sheet are based upon test conducted by Master Paints and Chemical Corp.

Since application variables are a major factor in product performance, this information should serve only as a general guide. Improvements in

coating technology may cause future technical data to vary from what is in this bulletin. Consult your Master Paints and Chemical Corp.

representative or call 787 835 4000 to obtain the most recent Product Data Sheet.

Master Products VV1235 Operating instructions

Brand: Master Products

Model: VV1235

Type: Operating instructions

This manual is also suitable for

VV1236

Download PDF

report

Master Products VV1235 Operating instructions

This manual is also suitable for

Master Products VV1235 Operating instructions

Related papers

Other documents