BLACK JACK 6125-9-34 Installation guide

Type
Installation guide

This manual is also suitable for

PROJECT HOW-TO’S COPYRIGHT © 2005, GARDNER-GIBSON, INC.
How to seal a roof with fibered asphalt roof coatings
1. With a long handled push broom or blower, clean roof surface of any loose debris
including dirt, gravel, sticks, etc.
2. When the roof surface is clean, inspect for cracks, blisters, and other problem areas.
Patch according to roof repair label directions. Allow to cure required time.
3. On a warm, sunny day, apply a fibered roof coating to a dry roof surface with a roof
brush. Working coating back and forth ensure all hairline cracks are filled. Do not
allow material to puddle or run.
APPLYING FIBERED ASPHALT ROOF COATING
Black Jack Roof & Foundation
Coating adds a layer of waterproof
protection on worn asphalt roofing.
This black asphalt coating is fiber
reinforced for added strength and
durability, and is liquid brush grade
for a wide range of applications.
Black Jack Rubr-Coat #57 is a
rubberized formula for greater
flexibility, and is waterbased with
nearly no odor and easy cleanup.
  • Page 1 1

BLACK JACK 6125-9-34 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI