2. Midmark
  3. LED Dental Light
LED Dental Light

Midmark LED Dental Light Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Midmark LED Dental Light Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
English-1
© 2011 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
TP200 Rev. A
Applies to Models:
153829 (-000 thru -008)
153830 (-000 thru -008)
153656 (-001)
153939 (-001)
Language of origin: English
Note
Midmark recommends two installers when performing this procedure.
003-2451-00 Rev. AA1 (1/17/2019)
LED Retrot Kit (Wall/Cabinet & Track Mount)
Installation [002-1530-00]
Style G
WARNING
To prevent risk of shock always disconnect power before
removing covers or performing any service procedure.
Step 1: Remove Halogen Light.
A) Loosen set screw to slide collar up as shown.
B) Push flex arm up to access key.
C) Remove key thru fixed arm hole.
Step 2: Disconnect wires.
A) Lower light flex arm.
B) Disconnect wires harness.
Collar
Flex Arm
Key
Wire
Harness
Flex Arm
Set Screw
Fixed
Arm Hole
midmark.com
English-2
© 2011 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
TP200 Rev. A
Step 5: Turn on electrical power to light.
Step 4: Installation of LED Light.
A) Push flex arm groove to line up with fixed arm hole.
B) Insert key thru suspension tube hole.
C) Loosen set screw to slide collar down.
D) Tighten set screw to secure light.
Collar
Flex Arm
Key
Wire
Harness
Flex Arm
Groove
Fixed Arm
Hole
Set Screw
Step 3: Connect wires.
A) Connect wires harness.
B) Insert flex arm into fixed arm.
Note: Use jumper wire provided when fix arm light
and flex arm harnesses do not match.
Jumper
Harness
Fixed
Arm
Harness
Flex
Arm
Harness
midmark.com
/