Midmark LED Dental Light Installation guide
- Type
- Installation guide
English-1
© 2011 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
TP200 Rev. A
Applies to Models:
153639 (-001)
Language of origin: English
Note
Midmark recommends two installers when performing this procedure.
003-2452-00 Rev. A (2/3/2012)
LED Retrot Kit (Universal Mount)
Installation [002-1536-00]
Step 2: Remove Halogen Light.
A) Remove screw, endcap and bottom cover.
B) Disconnect wire harness in fixed arm.
C) Remove retaining ring from flex arm shaft.
C) Lift flex arm out of fixed arm.
D) Keep retaining ring, cover ring and stop ring.
Step 1: Turn off electrical power to light.
Endcap
Fixed Arm
Wire
Harness
Stop
Ring
Screw
Flex Arm
Bottom Cover
Retaining
Ring
Cover
Ring
Style A
midmark.com
English-2
© 2011 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
TP200 Rev. A
Step 4: Turn on electrical power to light.
Step 3: Installation of NEW Flex Arm.
A) Install cover ring and stop ring over wire harness onto flex arm.
B) Position tab of stop ring in line with flex arm, facing light
head as shown.
C) Insert wiring and flex arm shaft into fixed arm assembly.
D) Slide retaining ring over wire harness and install onto flex
arm shaft.
E) Connect wire harnesses.
F) Install bottom cover and end cap with screw.
Endcap
Fixed Arm
Wire
Harness
Stop
Ring
Screw
Flex Arm
Bottom Cover
Retaining
Ring
Cover
Ring
Style A
midmark.com
-
1
-
2
Midmark LED Dental Light Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Midmark 255 LED Procedure Light ) - Wall Installation guide
-
Midmark Dental Light (Halogen) Installation guide
-
Midmark LED Dental Light Installation guide
-
-
-
Midmark 250 LED Exam Light User guide
-
-
-
-