AXIOMTEK GOT318A-ELK-WCD User manual

GOT318A-ELK-WCD

All-in-One

18.5” WXGA TFT Fanless

PCT Multi-Touch Panel PC

User’s Manual

ii

Disclaimers

This manual has been carefully checked and believed to contain accurate information.

Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third

party’s rights, or any liability arising from such uses.

Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,

completeness or usefulness of any information in this document. Axiomtek does not make any

commitment to update any information in this manual.

Axiomtek reserves the right to change or revise this document and/or product at any time

without notice.

No part of this document may be reproduced, stored in a retrieval system, or transmitted in

any forms or by any means, electronic, mechanical, photocopying, recording, among others,

without prior written permission from Axiomtek Co., Ltd.

WARNING

• Replacing the battery with an incorrect model may cause an

explosion. Only use the same or equivalent type of battery as

recommended by the manufacturer.

• Properly dispose of used batteries according to the instructions.

October 2023, Version A2

Printed in Taiwan

iii

Safety Precautions

Before getting started, please read the following important safety precautions.

1. Be sure to ground yourself to prevent static charge when installing any internal

components. Use a grounding wrist strap and place all electronic components in any

static-shielded devices. Most electronic components are sensitive to static electrical

charge.

2. Disconnect the power cord from the GOT318A-ELK-WCD prior to any installation. Be

sure both the system and all external devices are turned off. Sudden surge of power

could ruin sensitive components. Make sure the GOT318A-ELK-WCD series is properly

grounded.

3. Make sure the voltage of the power source is correct before connecting the GOT318A-

ELK-WCD to any power outlet.

4. Turn off system power before cleaning. Clean the system using a cloth only. Do not

spray any liquid cleaner directly onto the screen.

5. Do not leave the GOT318A-ELK-WCD in an uncontrolled environment where the

storage temperature is below -10°C or above 50°C as it may damage the equipment.

6. Do not open the system’s back cover. If opening the cover for maintenance is a must,

only a trained technician is allowed to do so. Integrated circuits on computer boards are

sensitive to static electricity. To avoid damaging chips from electrostatic discharge,

observe the following precautions:

 Before handling a board or integrated circuit, touch an unpainted portion of the

system unit chassis for a few seconds. This will help to discharge any static

electricity on human body.

 When handling boards and components, wear a grounding wrist strap available

from most electronic component stores.

Trademark Acknowledgments

Axiomtek is a trademark of Axiomtek Co., Ltd.

Intel® and Pentium® are registered trademarks of Intel Corporation.

Windows 10 and Windows 10 IoT Enterprise are trademarks of Microsoft Corporation.

Other brand names and trademarks are the properties and registered brands of their

respective owners.

iv

v 
Table of Contents 
 
 
Disclaimers ..................................................................................................... ii 
Safety Precautions ........................................................................................ iii 
SECTION 1  INTRODUCTION ..................................... 1 
1 General Descriptions .......................................................................... 1 
2 Specifications ...................................................................................... 2 
3 Dimensions and Outlines ................................................................... 4 
4 I/O Outlets ............................................................................................ 6 
5 Packing List ......................................................................................... 6 
SECTION 2  HARDWARE INSTALLATION .................... 8 
1 Board Layout ....................................................................................... 8 
2 Summary of Jumper Settings ............................................................ 9 
2.1 Restore BIOS Optimal Defaults (JP1) ....................................................... 10 
3 Connectors ........................................................................................ 11 
3.1 DC-in Phoenix Power Connector ...................................................................... 12 
3.2 Ethernet Connector (CN29, CN21) ................................................................... 12 
3.3 Serial Port Connector (CN27, COM2~3) ........................................................... 13 
3.4 HDMI Connector (CN22) ................................................................................... 13 
3.5 USB 3.2 Connector (CN24, CN25) .................................................................... 14 
3.6 ATX/AT Switch (SSW1) ...................................................................................... 14 
3.7 Remote Power Switch Connector ..................................................................... 14 
3.8 SATA Connector (CN10) .................................................................................... 15 
3.9 SATA Power Connector (CN7) .......................................................................... 15 
3.10 Full-Size PCI Express Mini Card Slot (CN16) ................................................. 16 
3.11 SIM Slot (CN16) ............................................................................................... 17 
3.12 M.2 Key E (CN18) ........................................................................................... 18 
4 Mounting the Panel PC ..................................................................... 19 
4.1 Panel Mount....................................................................................................... 19 
4.2 Wall Mount (wall mount kit optional) .................................................................. 21 
4.3 VESA Mount (Support VESA standard 100x100) ..................................... 23 
2.4 Desktop Mount (Desktop stand kit optional) ...................................................... 25 
5 Hardware Installation ........................................................................ 26 
5.1 Installing an HDD ...................................................................................... 26 
5.2 Installing DRAM ......................................................................................... 28 
5.3 Connecting the Power Input ...................................................................... 30 
6 Wireless LAN Module Installation (optional) .................................. 30 

vi 
SECTION 3  AMI BIOS SETUP UTILITY ..................... 33 
1 Starting ............................................................................................... 33 
2 Navigation Keys ................................................................................ 33 
3 Main Menu .......................................................................................... 34 
4 Advanced Menu ................................................................................. 35 
4.1 Trusted Computing ............................................................................................ 36 
4.2 CPU Configuration ............................................................................................. 38 
4.3 Storage Configuration ........................................................................................ 42 
4.4 USB Configuration ............................................................................................. 44 
4.5 F81966 Super IO Configuration ........................................................................ 45 
4.6 Hardware Monitor .............................................................................................. 49 
5 Chipset Menu ..................................................................................... 50 
6 Security Menu .................................................................................... 51 
7 Boot Menu .......................................................................................... 55 
8 Save & Exit Menu .............................................................................. 56 
SECTION 4   DRIVER and INSTALLATION ................. 59 
1 Operating System ............................................................................. 59 
1.1 Driver download ........................................................................................ 59 
2 Touch Screen ..................................................................................... 60 
APPENDIX A   TPM BitLocker SETTINGS ................ 61 
 
   

vii

This page is intentionally left blank.

GOT318A-ELK-WCD User’s Manual

Introduction 1

SECTION 1

INTRODUCTION

This section contains general information and detailed specifications of the GOT318A-ELK-

WCD, including the following subsections:

Figure 1-1 Front panel of the GOT318A-ELK-WCD

⚫ General Descriptions

⚫ Specifications

⚫ Dimensions and Outlines

⚫ I/O Outlets

⚫ Packing List

1.1 General Descriptions

The GOT318A-ELK-WCD multi-touch panel PC adopts a 18.5-inch FHD TFT LCD with 400-

nit brightness and supports Intel® Celeron® processor J6412 (Elkhart lake) up to 10W,

providing excellent computing performance and thermal resistance. This fanless platform is

particularly designed for operation under harsh environments including steel refineries, oil

pipes, ships, machine makers, and many more. Having the abilities described below surely

makes GOT318A-ELK-WCD the most robust and cost-effective solution.

 Designed for extended operating temperature range and ingress protection

The GOT318W-ELK-WCD’s compact industrial design and fanless cooling system allow the

panel PC to sustain an extended operating temperature range between -10°C and +50°C,

making the system a power-efficient solution. It also features an IP65 front bezel for protection

from liquid and dust.

 Reliable and stable design

The GOT318A-ELK-WCD is specifically designed for vibration-prone environments, best for

the transportation (vehicle, railway, marine) and industrial machinery markets. With a patented

anti-vibration design, the GOT318A-ELK-WCD is able to work in operation mode under 1G (5

~ 500Hz), which has significantly improved system reliability and sustainability.

NOTE

Heavy-vibration may sometimes cause the LCD screen to flash in white

color; however, it won’t affect the function of the product.

GOT318A-ELK-WCD User’s Manual

2 Introduction

 WLAN antenna supported (optional)

The GOT318A-ELK-WCD includes two Mini Card slots as an add-on option for connecting to

a wireless LAN card under Wi-Fi 4/5/6 protocols or with other LTE applications. These slots

also come with three fixed rotational WLAN antennas as optional components for wireless

network connection.

 Multi-Touch PCAP touch with 7H surface hardness

The GOT318A-WCD comes with a user friendly multi-PCAP touchscreen display which allows

users to operate the panel PC with direct touch. The surface hardness of the touch glass is up

to 7H, providing excellent anti-scratch protection.

 Other features

The GOT318A-ELK-WCD features one 260-pin up to DDR4-3200 SODIMM socket to support

maximum system memory capacity of up to 32GB, along with one 2.5” wide temperature

SATA SSD for storage needs. It also provides a full set of I/O including RS-232/422/485, USB

3.0, audio (line-out), HDMI and VGA output, as well as Gigabit Ethernet. This slim panel PC

supports panel mount as the standard installation, plus optional wall mount, VESA mount, and

desktop stand mount to offer more installation flexibility.

1.2 Specifications

Main CPU Board

⚫ CPU

⚫ Intel® Celeron® processor J6412 (Elkhart Lake), up to 10W

⚫ System Memory

➢ 1 x DDR4 2133/2400/2666/3200MHz SO-DIMM socket

➢ Maximum memory up to 32GB

⚫ BIOS

➢ AMI UEFI BIOS

I/O System

⚫ Standard I/O

➢ 2 x DB9 half cut bracket (Default)

➢ 1 x COM for RS-232/422/485

➢ 4 x USB 3.1(10Gbps)

➢ 1 x Power button

➢ 1 x AT/ATX switch

➢ 1 x Grounding hole

➢ 1 x HDMI output

➢ 1 x VGA output

➢ 1 x Audio line out

⚫ Ethernet

➢ 1 x 2.5GBase-T Ethernet with Intel i226-LM (w/TSN); supports Wake-on-LAN, PXE

Boot ROM

➢ 1 x 10/100/1000 Mbps Ethernet with Intel® i210-AT; supports Wake-on-LAN, PXE

Boot ROM

GOT318A-ELK-WCD User’s Manual

Introduction 3

⚫ Expansion

➢ 1 x Full-size PCI-Express Mini Card slot (PCIe / mSATA + USB)

➢ 1 x M.2 Key E 2230 (for Wi-Fi)

⚫ Power connector

➢ 1x Phoenix power connector for DC power input

System Specifications

⚫ 18.5” FHD (1920 x 1080) LCD 350 nits with LED backlight

⚫ Projected capacitive multi-touch

⚫ Fanless design for heat dispensation

⚫ IP65 aluminum front bezel

⚫ Storage

➢ 1 x 2.5” wide temperature SATA SSD (supports 7mm and 9.5mm; removable)

⚫ Weight(Net/Gross)

➢ 5.91kg(13.02lb) / 7.95kg(17.52lb)

⚫ Dimensions

➢ System: 475mm (18.7 ") x 59.4 mm (2.3") x 302 mm (11.89")

➢ Packing: 605 mm (23.81") (W) x 200 mm (7.87") (D) x 505 mm (19.88") (H)

⚫ Operating temperatures

➢ -10°C to 50°C (+14°F to +122°F)

⚫ Storage temperatures

➢ -10°C to 50°C (+14°F to +122°F)

⚫ Relative humidity

➢ 10% to 95% @ 40°C, Non-condensing

⚫ System power input

➢ DC power input: +9 to 36VDC with Phoenix power connector

NOTE

• All specifications and images are subject to change without notice.

• The performance of the system might be adversely affected at an

operating temperature above 50°C.

GOT318A-ELK-WCD User’s Manual

4 Introduction

1.3 Dimensions and Outlines

The figures below show the dimensions and outlines of the GOT318A-ELK-WCD panel PC.

Front dimensions: 475mm (18.7 ") x 59.4 mm (2.3") x 302 mm (11.89")

GOT318A-ELK-WCD User’s Manual

Introduction 5

Cut-out dimensions of the GOT318A-ELK-WCD

Cut-out dimensions: 462.4 x 289.4 mm

NOTE

The wall depth limit for panel mount is 6 mm.

GOT318A-ELK-WCD User’s Manual

6 Introduction

1.4 I/O Outlets

Please refer to figure 1-4 for the I/O locations of the GOT318A-ELK-WCD.

Figure 1-4: Bottom view of the GOT318A-ELK-WCD

No.

Note.

No.

Note.

1

Backlight ON/OFF

10

1x 2.5 Gigabit Ethernet

2

Brightness Adjust +/-

11

4x USB3.2 Gen2

3

Speaker

12

1x HDMI 1.4b out

4

Proximity and ambient light

sensors (optional)

13

1x Line out / MIC

5

Power Button

14

1x VGA

6

DC Power Input

15

1x COM for RS232/422/485

7

Remote Power Switch

16

1x Grounding hole

8

Optional flexible IO

(Default 2x DB9 half cut

bracket)

17

AT/ATX switch

9

1x 1 Gigabit Ethernet

1.5 Packing List

A complete bundled package should contain the following items:

⚫ GOT318A-ELK-WCD unit x 1

⚫ Phoenix connector (DC power version only)

⚫ Panel mount kit

Please contact an Axiomtek distributor immediately if any of the above-mentioned items is

missing.

GOT318A-ELK-WCD User’s Manual

Introduction 7

This page is intentionally left blank.

GOT318A-ELK-WCD User’s Manual

8 Hardware and Installation

SECTION 2

HARDWARE INSTALLATION

The GOT318A-ELK-WCD provides rich I/O ports and flexible expansion features for users to

perform various tasks. This section provides detailed information on the hardware

components of the panel PC as well as installation instructions, including the following

subsections:

⚫ Board Layout

⚫ Jumper and Connector Settings

⚫ Mounting Methods

⚫ Hardware Installation

⚫ Power Input

2.1 Board Layout

Please follow the steps below to open the GOT318A-ELK-WCD unit.

Step 1 Remove the four screws (see red circles in Figure 2-1) on the back cover.

Figure 2-1: Back cover

Step 2 Remove the back cover.

Figure 2-2: Board layout

GOT318A-ELK-WCD User’s Manual

Hardware and Installation 9

2.2 Summary of Jumper Settings

Proper jumper settings configure the GOT318A-ELK-WCD to meet various application needs.

Hereby all jumpers settings along with their default settings are listed for devices onboard.

Figure 2-3: Definitions of pin settings

Proper jumper settings configure the GOT318A-ELK-WCD to meet various application

purposes. A table of all jumpers and their default settings is listed below.

Jumper

Descriptions

Setting

JP1

Restore BIOS optional defaults (Clear CMOS)

Default: normal operation

1-2 closed

That a cap on a jumper is to “close” the jumper, whereas that offs a jumper is to “open” the

jumper.

【Note】: How to setup Jumpers

GOT318A-ELK-WCD User’s Manual

10 Hardware and Installation

2.2.1 Restore BIOS Optimal Defaults (JP1)

Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2.

This procedure is to restore BIOS optimal defaults.

Function

Setting

Normal operation (default)

1-2 closed

Clear RTC

2-3 closed

GOT318A-ELK-WCD User’s Manual

Hardware and Installation 11

2.3 Connectors

Please refer to below connector table to get their pin assignments

External connectors

Sections

DC-in Phoenix Power Connector

2.3.1

Ethernet Connector

2.3.2

Serial Port Connector

2.3.3

HDMI Connector

2.3.4

USB 3.2 Connector

2.3.5

ATX Switch Connector

2.3.6

Remote Power Switch Connector

2.3.7

Internal Connectors

Sections

SATA Signal Connector

2.3.8

SATA Power Connector

2.3.9

Full-Size Express Mini Card slot

2.3.10

SIM Slot

2.3.11

Lin/Mic in connector

2.3.12

M.2 Key E

2.3.13

GOT318A-ELK-WCD User’s Manual

12 Hardware and Installation

2.3.1 DC-in Phoenix Power Connector

The system supports 9~36V Phoenix DC-in connector for system power input.

2.3.2 Ethernet Connector (CN29, CN21)

The GOT318A-ELK-WCD has two RJ-45 connectors: LAN1 and LAN2. LAN1 is designed by

Intel i210-AT and LAN2 is Intel i226.

Table 2-5 Pin assignment for LAN1 (CN29)

Table 2-6 Pin assignment for LAN2 (CN21)

2500/1000

Base-T

100/10

Base-T

Description

L1

BI_DA+

TX+

Bidirectional or Transmit Data+

L2

BI_DA-

TX-

Bidirectional or Transmit Data-

L3

BI_DB+

RX+

Bidirectional or Receive Data+

L4

BI_DC+

N.C.

Bidirectional or Not Connected

L5

BI_DC-

N.C.

Bidirectional or Not Connected

L6

BI_DB-

RX-

Bidirectional or Receive Data-

L7

BI_DD+

N.C.

Bidirectional or Not Connected

L8

BI_DD-

N.C.

Bidirectional or Not Connected

A

Active Link LED (Yellow)

Off: No link

Blinking: Data activity detected

B

Speed LED

2500: Green

1000: Orange

100/10: OFF

Pins

Signals

1

DC+

2

GND

3

DC-

1000

Base-T

100/10

Base-T

Description

L1

BI_DA+

TX+

Bidirectional or Transmit Data+

L2

BI_DA-

TX-

Bidirectional or Transmit Data-

L3

BI_DB+

RX+

Bidirectional or Receive Data+

L4

BI_DC+

N.C.

Bidirectional or Not Connected

L5

BI_DC-

N.C.

Bidirectional or Not Connected

L6

BI_DB-

RX-

Bidirectional or Receive Data-

L7

BI_DD+

N.C.

Bidirectional or Not Connected

L8

BI_DD-

N.C.

Bidirectional or Not Connected

A

Active Link LED (Yellow)

Off: No link

Blinking: Data activity detected

B

Speed LED

1000: Orange

100/10: Green/OFF

Page is loading ...

AXIOMTEK GOT318A-ELK-WCD User manual

AXIOMTEK GOT318A-ELK-WCD User manual

Related papers

Other documents