2. RC4WD
  3. LED Basic Lighting System

RC4WD LED Basic Lighting System User manual

  • Hello! I've reviewed the provided instructions for the LED Light Kit for the 1/18 BlackJack Body. This document outlines the installation process, including steps for removing body posts, bending LED posts, and installing the LEDs. I'm ready to answer any questions you might have about this process!
  • What is the first step in the installation?
    What angle should the LED posts be bent for the marker lights?
    What should be done when installing the LEDs?
BHCS 2X6mm
Use caution when installing LEDs in this location.
The posts may need to be bent to make clearance
Step 1. Step 2.
Step 3. Step 4.
Remove the front body posts Bend the LED posts inward for the marker lights
at a 60 degree angle
Completed Assembly
RC4WD 100-0041
LED Light Kit for 1/18 BlackJack Body
/