![](//vs1.manuzoid.com/store/data-gzf/68d025b8f84975b5b7ed0e09062cd28c/2/002367342.htmlex.zip/bg1.jpg)
Use a 1.6mm drill to
mark the holes while
using the fender as a
guide.
Do not over-tighten the screws as that
may damage the rubber material.
Front Left Front right
Rear Right Rear Left
Step 1. Step 2.
Step 3.
Description for this step Description for this step
Description for this step
RC4WD USA 100-0002
RC4WD Fender Flares for the Chevy Blazer