Avaya Business CommunicationsManager Programmable Analog Interface User manual
- Type
- User manual
Information Sheet
Business Communications
Manager Programmable Analog
Interface
All Business Communications Manager software has built-in market profiles. Some market
profiles include analog parameters. Working with a licensed Nortel technician, you can
customize the specified market profile analog parameters.
Customizing and localizing a market profile file is a two-step process that you complete with
the assistance of a licensed Nortel technician:
1. work with the licensed Nortel technician, who can use a data entry tool to
customize the analog parameters of the market profile file for you, and load it
onto your BCM system to test
2. apply a permanent patch created by Nortel that can be applied to any BCM
requiring the modified analog parameters
The programmable analog interface has a set-based administration interface that you access
through a set that is on your BCM system. Administration telset interfaces are accessible only
by a user with an Installer level of telset user privileges. Use the set-based administration
interface to access the programmable analog interface status, and optionally remove the
current analog profile file if it is determined that the installed analog profile file is
inappropriate for your installation.
To use the programmable analog interface, you must first download and install the latest BCM
patch on your BCM system.
Removing a profile file from a BCM
The set-based administration interface to the analog profile status can be used to access the
profile file status and to optionally remove the profile. The profile should only be removed
under guidance from Nortel Support (1-800-nortel support).
1.Call 1-800-nortel support to reach an authorized Nortel technician.
2.In the handset interface, press ** Option.
3.Log on by following the voice prompts or the display button options.
4.Enter your password and press OK.
5.Press Next to continue through the screens until you reach the
Profile File screen.
The Profile File screen appears. The Profile status is Y if a profile file
exists.
If the Profile status is N, then no profile file exists on the BCM system
and no further action is required.
6.Press DEL.
The file is removed, and the Profile File status changes to N.
User ID:_
CANCL BKSP OK
Password:_
CANCL BKSP OK
Profile File: Y
DEL
Profile File: N
DEL
.
2
NN40010-677
Alarms
If your system does not have an analog profile, no new alarms appear on your system. If your
system has an analog profile, the following new alarms can appear.
Table 1 Programmable analog interface alarms
Alarm
number Alarm text Action
382 Market profile does not match
analog profile base market
profile
The market profile you selected in the BCM does not
match the market profile used as a base for the
analog profile file. Either change the BCM market
profile, or change (or delete) the profile file.
383 Profile is corrupt or invalid. You cannot use the profile file you selected. Delete or
replace the profile file.
www.nortel.com
Copyright 2008
Sourced in Canada
Document number: NN40010-677 01.01
Standard
December 2008
-
1
-
2
Avaya Business CommunicationsManager Programmable Analog Interface User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Avaya Business Communications Manager - Programmable Analog Interface User manual
-
Avaya Business Communications Manager 5.0 - Configuration - System Configuration manual
-
Avaya BCM50 Configuration Guide
-
-
-
-
-
-
Avaya BCM 450 User manual
-