2. Breezesta
  3. Rectangular Bar Table

Breezesta Rectangular Bar Table, Square Bar Table Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BREEZESTA 42" x 60" Bar Table, model BH-0915. The document provides a detailed breakdown of the steps required to put the table together, along with a list of the components and screws you'll need. I'm ready to help if you have any questions about the process or the parts.
  • What are the included parts for the table assembly?
    What is the size of the colored screws?
    What is the length of the uncolored screws?
Attach Table Top to base using uncolored screws (B).
From the underside screw through pre-drilled holes in
the aluminum rails into base assembly.
Attach Side Assemblies to Spreaders by placing the
tenon into the mortise (pocket) and attching with
screws (A) as shown.
Place the table top on the base so that the Aluminum Rails on
the table top fit with in the base as shown above
Q
Ver 13.0
A-3"(28 pcs.)colored
B-2"(4 pcs.)uncolored
A
BASE SPREADER
SPREADERS
STEP 1
SIDE ASSEMBLIES
STEP 2
TABLE TOP
ALUMINUM RAILS
STEP 3
B
BREEZESTA tm
Recycled Poly Furniture
42" x 60" BAR TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (6)
Base Spreader (1)
Table Top (1)
Colored Screws "A" (28)
Un-Colored Screws "B" (4)
Insert Bit Tool (1)
BH-0915
/