Breezesta Flat Seat Bar Stool Assembly Instructions

Attach Side Assemblies to Spreaders by placing the

tenon into the mortise (pocket) and attching with

screws (A) as shown.

Place the Seat Assembly on the base so that the pre drilled

holes in the seat align with the pre drilled holes in the Side

Assemblies.

Attach the Seat Assembly to the base using screws (A).

Ver 13.0

A-2.5"(16 pcs.)colored

SPREADERS

STEP 1

SIDE ASSEMBLIES

STEP 2

SEAT ASSEMBLY

STEP 3

BREEZESTA tm

Recycled Poly Furniture

FLAT SEAT BAR STOOL

LIST OF PARTS

Side Assemblies (2)

Spreaders (6)

Seat Assembly (1)

Colored Screws "A" (16)

Insert Bit Tool (1)

BH-0903

Download PDF