2. Breezesta
  3. Rectangular Dining Table

Breezesta Rectangular Dining Table Assembly Instructions

  • Hello! I've reviewed the user manual for the BREEZESTA Dining Table DH-0711. This document outlines the assembly process, detailing the different steps for attaching the side assemblies, spreaders, and tabletop. The manual also provides a comprehensive list of parts and screws. I'm ready to assist with any questions you might have regarding assembling your new dining table!
  • What screws are used to attach the side assemblies to the spreaders?
    What screws are used to attach the tabletop to the base?
    What is included in the list of parts?
Step 1. Attach Side Assemblies to Spreaders by placing the tenon
into the mortise (pocket) and attching with screws (A) as shown. Step 2. Place the table top on the base so that the aluminum frame on the table top fits
with in the base. Attach Table Top to base using uncolored screws (B). From the
underside screw through pre-drilled holes in the aluminum frame into base assembly.
Q
Ver 13.0
A-3"(20 pcs.)colored
B-2.5"(4pcs.)uncolored
A
BASE SPREADER
SPREADERS
STEP 1
SIDE ASSEMBLY SIDE ASSEMBLY
STEP 2
B
BREEZESTA tm
Recycled Poly Furniture
42"X 84" DINING TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (4)
Base Spreader (1)
Table Top (1)
Colored Screws "A" (20)
Un-Colored Screws "B" (4)
Insert Bit Tool (1)
DH-0711
/