2. Breezesta
  3. Square Dining Table

Breezesta Square Dining Table Assembly Instructions

  • Hello! I've reviewed the user manual for the BREEZESTA Dining Table DH-0709. This document provides step-by-step instructions for assembling the table, including attaching the side assemblies, spreaders, and table top. It also details the parts list and screw types used in the process, and the table is made from recycled poly furniture with aluminum rails. I'm here to help answer any questions you might have about the assembly or features of this table.
  • How do I attach the side assemblies to the spreaders?
    How do I attach the table top to the base?
    What is the size of screw A?
    What is the size of screw B?
Attach Side Assemblies to Spreaders by placing the
tenon into the mortise (pocket) and attching with
screws (A) as shown.
Place the table top on the base so that the Aluminum Rails on
the table top fit with in the base as shown above
Attach Table Top to base using uncolored screws (B).
From the underside screw through pre-drilled holes in
the aluminum frame into base assembly.
R
Ver 13.0
A-3"(20 pcs.)colored
B-2.5"(4pcs.)uncolored
A
BASE SPREADER
SPREADERS
STEP 1
SIDE ASSEMBLIES
STEP 2
TABLE TOP
ALUMINUM RAILS
STEP 3
B
BREEZESTA tm
Recycled Poly Furniture
58"X58" DINING TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (4)
Base Spreader (1)
Table Top (1)
Colored Screws "A" (20)
Un-Colored Screws "B" (4)
Insert Bit Tool (1)
DH-0709
/