2. Breezesta
  3. Rectangular Counter Table

Breezesta Rectangular Counter Table Assembly Instructions

  • Hello! I have reviewed the assembly instructions for the BREEZESTA Counter Table CH-0810. This document outlines a 3-step process for assembling the table, using side assemblies, spreaders, and a table top. It also includes a list of all the parts needed, including different types of screws. I'm ready to answer your questions about the assembly process or any other details in the instructions.
  • How many side assemblies are included?
    How many spreaders are included?
    What size are the colored screws?
    What size are the uncolored screws?
Attach Side Assemblies to Spreaders by placing the
tenon into the mortise (pocket) and attching with
screws (A) as shown.
Place the table top on the base so that the table top fits
with in the base as shown above Attach Table Top to base using uncolored screws (B).
From the underside screw through pre-drilled holes in
the attached rail into table top.
B
Ver 13.0
A-2.5"(12 pcs.)colored
B-2"(6 pcs.)uncolored
A
SPREADERS
STEP 1
SIDE ASSEMBLIES
A
STEP 2
STEP 3
B
B
BREEZESTA tm
Recycled Poly Furniture
26" x 28" COUNTER TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (6)
Table Top (1)
Colored Screws "A" (12)
Un-Colored Screws "B" (6)
Insert Bit Tool (1)
CH-0810
/