2. Breezesta
  3. Round Dining Table

Breezesta Round Dining Table Assembly Instructions

  • Hello! I've reviewed the user manual for the BREEZESTA Dining Table DH-0702. This manual provides instructions on how to assemble your new 32" round dining table, including a parts list and a three-step guide. I'm ready to answer your questions about the assembly process or the parts of the table.
  • How many colored screws are included?
    How many uncolored screws are included?
    What is the first step in the assembly?
Attach Side Assemblies to Spreaders by placing the
tenon into the mortise (pocket) and attching with
screws (A) as shown.
Place the table top on the base so that the
Aluminum Rails on the table top fit with in the
base as shown above
Attach Table Top to base using uncolored screws (B).
From the underside screw through pre-drilled holes in
the aluminum rails into base assembly.
K
Ver 13.0
A-3"(20 pcs.)colored
B-2.5"(4pcs.)uncolored
A
BASE SPREADER
SPREADERS
STEP 1
SIDE ASSEMBLIES
STEP 2
TABLE TOP
ALUMINUM RAILS
STEP 3
B
BREEZESTA tm
Recycled Poly Furniture
32" ROUND DINING TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (4)
Base Spreader (1)
Table Top (1)
Colored Screws "A" (20)
Un-Colored Screws "B" (4)
Insert Bit Tool (1)
DH-0702
/