Panasonic ET-PKE16S Datasheet

Category
Projector mounts
Type
Datasheet
S P E C F I L E
ET-PKE16S
Ceiling mount bracket for low ceilings
As of September 2011
SFL11A019
1 / 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
292.5
(11-17/32)
10°
10°
469
(18-15/32)
428.5
(16-7/8)
386.5
25*
(31/32)*
650
(25-19/32)
A*
1
(15-7/32)
From center of
rotation to center
of lens
*
340
(13-3/8)
90
(3-17/32)
90
(3-17/32)
340
10°
10°
(13-3/8)
Projector
13
×
20
(1/2
×
25/32)
4– 13 ( 1/2)
Specifications
Vertical correction angle: ±15°
Horizontal slant correction angle: ±5°
Horizontal turn correction angle: ±10°
Dimensions (W × H × D): 400 × 205 × 400 mm
(15-3/4˝ × 8-1/16˝ × 15 -3/4 ˝)
Weight: Approx. 8.5 kg* (18.7 lbs*)
Applicable bracket assembly: ET-PKE16B
Parts
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
*
Average value. May differ depending on models.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is used when mounting a Panasonic projector to low ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKE16B bracket assembly.
C a u t i o n :
Mounting should be done by a qualified technician.
Make sure that the mounting (ceiling) area has sufficient strength.
Read the enclosed mounting instructions thoroughly before starting.
Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
The illustration shows the ceiling mount bracket
when it is combined with the ET-PKE16B and
the PT-EX16K is attached.
  • Page 1 1

Panasonic ET-PKE16S Datasheet

Category
Projector mounts
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI