2. Vicoustic
  3. Penray 02
Penray 02

Vicoustic Penray 02 User manual

  • Hello! I've reviewed the Installation Manual for Vicoustic's Penray 02 tiles, including models tiles 02.1, 02.2, 02.3 and 02.4. This document details the installation process of these acoustic panels, including the use of Flexi Glue Ultra for both wall and ceiling applications. I'm ready to answer any questions you have about this product or its installation.
  • What glue should I use?
    How long should I wait after applying the glue?
    Can I adjust the panel after bonding?
    Can I install Gen Tiles behind radiators?
GEN_VMT
EN
Installation Manual
Penray 02 Tiles
EN
PENRAY 02_tiles
tiles 02.1 | 3 uni. tiles 02.2 | 3 uni. tiles 02.3 | 3 uni. tiles 02.4 | 3 uni.
Level Measuring Tape Box Cutter Flexi Glue Ultra
Included
Material Needed
Not included
EN
1_
2_
Apply Flexi Glue Ultra on the back of the acoustic panel, near the edges and in the center. Do
not wait longer than 5 minutes after applying the glue to attach the panel to the wall.
Place the panel on the suitably chosen position on the wall. Once in the desired place, press
rmly against the wall for 15 seconds.
!
For the installation of Gen Tiles on the ceiling, we recommend using Flexi Glue Ultra.
To ensure that you maximise the strength of the glue, don’t make any adjustments to the panel
after bonding.
Do not apply Gen Tiles behind radiators or too close to a heat source.
EN
Possible setup examples
One box (12 tiles)
One box (12 tiles)
EN
One box (12 tiles)
One box (12 tiles)
EN
One box of each color (36 tiles)
EN
Main Oce, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Oce
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T (+351) 212 964 100
Info and Sales
E sales@vicoustic.com
www.vicoustic.com
© Vicoustic, 2021 | V7
No parts of this document might be copied and/or published without written consent of Vicoustic.
/