VicDisplay Guitar-Bass

Vicoustic VicDisplay Guitar-Bass User manual

  • Hello! I've reviewed the VicDisplay Guitar/Bass Installation Manual. This document provides step-by-step instructions for mounting your guitar/bass holder, including the necessary tools and materials. I'm ready to answer any specific questions you might have about the installation process.
  • What tools are included with the VicDisplay Guitar/Bass holder?
    What tools are needed for installation?
    What are the steps for installing the VicDisplay panel
EN
VicDisplay Guitar/Bass
Installation Manual
EN
MATERIAL NEEDED
Included
VicDisplay Guitar/Bass
Measuring Tape
Not Included
Wall Plugs and Screws
Drill
LevelScrewdriver
Flexi Glue Ultra
1 2
Place the VicDisplay panel
in the desired position.
Use a bubble level to align
it verticaly. Mark the hole
centers.
Drill the holes and insert wall
plugs if needed.
Guitar/Bass Holder
Double-sided adhesive pad
EN
3Apply the provided stickers
on the back of the panel. For
a better xation you can use
Flexi Glue Ultra .
4Place the VicDisplay panel in
the nal position. Re-check
the vertical alignment. Press
the panel so that the adhesive
pads adhere to the wall.
5Fix the guitar holder.
© Vicoustic, 2022 | V2
No parts of this document might be copied and/or published without written consent of Vicoustic.
Main Oce, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Oce
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T (+351) 212 964 100
Info and Sales
E sales@vicoustic.com
www.vicoustic.com
/