SMART KITCHEN Image View User guide

Image View
Brand
SMART KITCHEN
Model
Image View
Type
User guide

SMART KITCHEN Image View lets you add images and place activated measurement devices on them. It supports most image formats and is optimized for PC web browsers. After uploading an image, select "Add location" to choose from a list of activated measurement devices and place them on the image. View the latest measurement results in the device's data box. You can add multiple images and change device placement later.

SMART KITCHEN Image View lets you add images and place activated measurement devices on them. It supports most image formats and is optimized for PC web browsers. After uploading an image, select "Add location" to choose from a list of activated measurement devices and place them on the image. View the latest measurement results in the device's data box. You can add multiple images and change device placement later.

GUIDE
IMAGE VIEW
FUNCTION
Ceruus Oy, SmartKitchen
Support:
1 (4)
smartkitchen.solutions
helpdesk@ioliving.com
How to use Image View feature
Image View feature allows user to add images to the SmartKitchen service. User can place activated
measurement devices to the image. The Image View supports the most used image formats. It has been
optimized for PC web browsers. The use of the Image View requires the acquisition of a SmartKitchen
license.
Using the Image View:
1. Log in to the SmartKitchen service and go to the Monitoring tab.
Select the Image View icon on the left side of the front page.
2. Select ”Upload new image”.
3. Select the image file by clicking ”Browse”. Give a name to the image on ”Image name” text box. Finally
select “Save”.
GUIDE
IMAGE VIEW
FUNCTION
Ceruus Oy, SmartKitchen
Support:
2 (4)
smartkitchen.solutions
helpdesk@ioliving.com
4. The selected image is uploaded to the service. The control buttons of the measurement devices
control are located under the icons on the left.
5. By selecting ”Add location”, a list of measurement devices activated for the account
opens on the left.
GUIDE
IMAGE VIEW
FUNCTION
Ceruus Oy, SmartKitchen
Support:
3 (4)
smartkitchen.solutions
helpdesk@ioliving.com
6. The measurement device can be added into the image by selecting it from the list and then selecting
its location in the image. A pin symbol appears in the image showing the location of the
measurement device. More measurement devices can be added to the image in the same way.
When the placement of the devices is complete, save the data by pressing the "Done" button in the
upper right corner of the page.
7. The data box of the measurement device placed in the image shows its latest measurement results.
Clicking on the name of the measurement device in the data box leads to its own page. Clicking the
green top of the data box diminishes it to a pin symbol, which returns to the data box by refreshing
the page.
8. It is possible to add several image files to the Image View by repeating the steps above. The already
placed measurement devices are showing the image file name in the list. The measurement device
can only be placed on one image at a time.
GUIDE
IMAGE VIEW
FUNCTION
Ceruus Oy, SmartKitchen
Support:
4 (4)
smartkitchen.solutions
helpdesk@ioliving.com
9. The placement of the measurement devices can be changed afterwards by selecting the image file,
then a settings icon (1.) and then “Change location”. The operating principle is the same as when
measurement devices are placed for the first time. The device location can be removed by selecting
“Remove location”. The name of the image file can be changed by selecting icon 2. The image file
can be removed by selecting the trash icon (3.) The changes made are accepted from the Done
button.
1.
2.
3.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

SMART KITCHEN Image View User guide

Image View
Brand
SMART KITCHEN
Model
Image View
Type
User guide

SMART KITCHEN Image View lets you add images and place activated measurement devices on them. It supports most image formats and is optimized for PC web browsers. After uploading an image, select "Add location" to choose from a list of activated measurement devices and place them on the image. View the latest measurement results in the device's data box. You can add multiple images and change device placement later.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents