Whirlpool WBC3535 A+NFS Program Chart

WBC3535 A+NFS
Whirlpool
Brand
Whirlpool
Model
WBC3535 A+NFS
Category
Fridge-freezers
Type
Program Chart

This manual is also suitable for

A. Refrigerator Compartment
2. Lighting
3. Shelves / Shelf area
4. Multi-flow cold air system
5. Cooler compartment
6. Rating plate with commercial name
8. Crisper divider
9. Reversibility kit
10. Egg tray
11. Separator
12. Door trays
B. Freezer Compartment
13. Storage baskets for frozen food items
14. Shelves
15. Middle basket (freezing zone)
16. Ice tray and/or cold accumulator
18. The freezer door trays for pizza or other frozen products with a
short storage time
Depending on the model the number and type of accessories may vary.
The freezer compartment can be used without the two upper baskets
to increase storage for large products. The lower basket must not be
removed.
Place the food products directly on the racks.
After inserting food, ensure that the freezer compartment door closes
properly.
C. Control panel
Anti-bacterial protection:
1. Filter in fan (depending on the model)
7. Crisper with antibacterial additives (depending on the model)
17. Door seals
The crisper and the door seals are manufactured from materials that
inhibit bacterial growth.
Notes
- In case of power failure the cold accumulator helps to keep
optimal storage temperature longer.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend on the
ambient temperature, frequency of opening the doors, as well as
location of the appliance. Temperature setting must consider these
factors.
- The appliance accessories are not suitable for washing in
dishwasher.
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, the appliance starts operation
automatically. Particular control elements are activated:
• The indicator lamps on the control panels light up for 2 seconds.
• Activation of a beep for 1 second.
Note:
• If food is placed in the refrigerator before the appliance has cooled
completely, it may deteriorate.
CONTROL PANEL DESCRIPTION
(1) Cavity selection “Fridge / Freezer” pushbutton
(2) Green lamp ON/OFF informing of:
- freezer cabinet temp. setting (green lamp light ON)
- fridge cabinet temp. setting - (green lamp light OFF)
(3) Temperature selection button “Temperature setting”.
(4) (5) (6) Green lamps indicating temperature settings.
(7) “Stand-by”/“Stop alarm” pushbutton.
(8) Internal light switch.
Temperature Adjustment between cabinets is made
with the “Fridge / Freezer” button (1). When the
lamp (2) is OFF the user can select temperature in
the fridge.
The temperature in the refrigerator compartment may be set by
the temperature setting pushbutton (3) on the control panel.
- To set a lower temperature, press pushbutton to: .
- To set a higher temperature, press pushbutton to: .
Level 3 is the recommended temperature setting.
On the left there are described the 5 set points for
the fridge compartment.
To adjust the temperature in the freezer
compartment, use the “Fridge / Freezer” button
(1) to control the temperature in the freezer
cabinet. The green lamp (2) turns ON.
The temperature in the freezer compartment may be set by the
temperature setting pushbutton (3) on the control panel.
- To set a lower temperature, press pushbutton to: .
- To set a higher temperature, press pushbutton to: .
On the left are described the 5 set points for the
freezer compartment and super freezing.
Eachconsecutive pressing of the button sets a
different temperature.
After “Super Freezing” (automatically disabled after 48 hours) the
freezer temperature sets to level 3. When the product is disconnected
from the power supply and then reconnected, the control unit
remembers previously set temperatures for freezer and refrigerator.
FAN WITH A BUTTON
The fan gives more even temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food.
To switch on the fan press the button (1a). It is advisable to activate the
fan when the ambient air temperature is over 27 ÷ 28°C or if you
perceive drops of water on the glass shelves or in the severe humidity
conditions.
Note
Do not obstruct the air intake area with food items.
The fan will run ONLY when the compressor is in operation.
Remember to turn off the fan when there is a lower ambient air
temperature.
If the appliance has the fan it can be equipped with the antibacterial filter.
Remove it from the box (found in the crisper drawer (item 7) and insert
into the cover of fan (item 1b).
The replacement procedure is attached with the filter.
DEFROSTING THE REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely automatic.
Droplets of water on the rear wall inside the refrigerator compartment
indicate that the automatic defrost phase is in progress. The defrost
water is automatically run into a drain hole and collected in a container,
where it evaporates.
DEFROSTING THE FREEZER COMPARTMENT
Whirlpool No Frost freezers provide chilled air circulation around the
storage areas and prevent the formation of ice, thereby completely
eliminating the need for defrosting. Frozen items don't stick to the walls,
labeling stays legible and storage space remains neat and clear.
PRODUCT SHEET
GB
ROBGRUSHSKCZPLIGB FINDKNSGRPENLFD
REPLACING THE LIGHT BULB
Always disconnect the refrigerator from
the power supply before replacing any
light bulb.
If the inside light is not working, it is necessary to:
1. Remove the light cover: put the fingers into the side ventilation holes
(1), stretch the cover gently and move it upwards.
2. Check the bulb. If necessary unscrew the broken bulb and replace it
with the new one (use maximum 15W bulb).
3. Put on the light cover.
Do not leave the bulb uncovered.
GUIDE TO SELECTING FUNCTIONS
Functions and settings
Temperature setting button is used to select the fridge/freezer
temperature set-point from among 5 levels (level 1, level 2, level 3, level
4, level 5) by consecutive pressing the button. Choices made depend on
lamp (2) state.
Alarm deactivation - the user has to press Stand-by / Stop alarm
pushbutton.
Super Freezing: for more efficient freezing activate this function 48
hours before freezing fresh products.
-
Select Freezer compartment by using button (1), lamp (2) shall turn ON.
- Press Temperature setting button until 3 green lamps light up
simultaneously (4) (5) (6).
After 24 hours place the food to be frozen in the upper basket of the
freezer compartment.
This function is automatically disabled after 48 hours.
To deactivate it earlier follow the procedure:
- Press the Temperature setting button again while the lamp (2)
remains ON - the temperature selection lights will return to the 1st
temperature level.
Stop alarm / Stand-by Mode
It allows the user to turn ON or to put in stand-by the product. This
function is enabled even if any alarm or failure appears.
• ON state: when the product is in the stand-by state to turn it ON,
press & hold stand-by pushbutton for 3 s.
• The product is turned ON.
• All functions shall be enabled.
• On/OFF stand-by state: when the product is ON and the stand-by
pushbutton is held for 3 s, the appliance goes OFF.
• The product is in stand-by mode loads are disabled.
• All functions shall be disabled.
• All indicators shall be turned OFF.
Notes
When two pushbuttons: stand-by and temperature setting are pressed at
once and held to check indication of the alarms (displayed by lamps (4)
(5) (6)) stand-by function is locked.
Door open alarm- when the refrigerator compartment door
remains open for more than 4 minutes:
• Light in the refrigerator compartment turns OFF
• Green lamps flash (4) (5) (6).
• Beep is activated.
When the door is closed the product returns to normal operation.
• The beep will stop
• The green lamps (4) (5) (6) stop flashing
• Light in the refrigerator compartment turns ON when the fridge
door is opened again.
“Black-out alarm” (power supply failure) - in case of power
failure,the appliance automatically monitors the temperature changes in
the freezer compartment after the power supply returns. The “Black-
out alarm” will activate, if the temperature has risen above the
admissible level. This is indicated by:
- Flashing of the green lamps (4) (5) (6)
- Activation of a beep.
When the “Black-out alarm” is active, it is recommended to proceed
as follows:
- If the food in the freezer is not frozen but is still cold, transfer it
promptly to the refrigerator compartment and consume within 24
hours.
- If the food in the freezer is frozen, it has re-frozen after thawing
caused by the power failure. The consumption of re-frozen food is not
recommended because it has lost its nutritive value and may be
hazardous to your health.
Note
The “Black-out alarm” does not guarantee the food quality and its
safety in case of consumption. It only indicates the necessity to assess
the quality of food in the freezer and refrigerator compartments.
To deactivate the alarm, press and hold Temperature setting pushbutton
& stand-by button and keep pressed until the flashing of the green lamps
(4) (5) (6) go off.
- The temperature will return to the normal operating cycle level and
the beep will stop.
"6th Sense" function
The "6th Sense" function helps to maintain optimal conditions to storage
of food and is automatically activated when:
• a large amount of food is loaded into the freezer;
• the freezer door is left open for a long time;
• a prolonged power failure takes place, causing the internal
temperature of the appliance to increase to values that cannot
guarantee safe storage of food.
PRODUCT SHEET
GB
5019 637 01045/A
Printed in Poland 06/09
OTHER ABNORMAL APPLIANCE OPERATIONS DISPLAYED BY LAMPS
In case of abnormal appliance operation, all the temperature selection lamps will flash and a beep will sound. After pressing the Stop
alarm / Stand-by mode button reset alarm , the beep will stop and the lamps will blink. To check the code alarm user have to press
and hold the Temperature setting & Stand-by pushbuttons and alarm code will be showing on the temperature lamps (possible
alarm codes are explained in the table below).
When this operation is released, the lamps will flash until the fault is eliminated. If any alarm shown in the table occurs, the
fridge/freezer functions such as temperature adjustment, super freezing are not available until the fault is eliminated.
When several alarms occur simultaneously, the alarm with the highest priority is displayed (Number 1 being the highest priority).
Alarm Priority
Codification to be displayed by
temperature lamps
Action
Lamp 4 Lamp 5 Lamp 6
Evaporator Temperature Sensor Alarm - Freezer compartment 1 Contact the After-Sales Service and provide the alarm code.
Evaporator Temperatutre Sensor Alarm - Fridge compartment 2 Contact the After-Sales Service and provide the alarm code.
Ambient Temperature Sensor Alarm - Freezer compartment 3 Contact the After-Sales Service and provide the alarm code.
Door open alarm 4 Close fridge door completely
Black -out alarm 5 The alarm deactivates when the minimum required temperature is reached.
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
Description Lamp OFF Lamp ON Lamp Flashing
  • Page 1 1
  • Page 2 2

Whirlpool WBC3535 A+NFS Program Chart

WBC3535 A+NFS
Whirlpool
Brand
Whirlpool
Model
WBC3535 A+NFS
Category
Fridge-freezers
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents