Gioteck EX-05 Military Style Quick Setup Manual

Type
Quick Setup Manual

Gioteck EX-05 Military Style is a wireless headset designed for use with the PlayStation 3 gaming console. The headset features a rechargeable Lithium-ion battery, which provides up to 3 hours of playtime on a single charge. The headset also features a built-in microphone, which allows users to chat with friends and teammates while gaming.

The Gioteck EX-05 Military Style headset is easy to set up and use. Simply plug the USB connector into a spare USB port on your PS3 console, and connect the Mini Jack end of the provided RCA/Mini Jack Cable into the corresponding socket on the Gioteck Wireless Receiver. You will then need to pair the Wireless Control Box with the Wireless Receiver by pressing and holding the mute button for 5 seconds. Once the two devices are paired, you will be able to hear yourself talking into the microphone through the headset earcups.

Gioteck EX-05 Military Style is a wireless headset designed for use with the PlayStation 3 gaming console. The headset features a rechargeable Lithium-ion battery, which provides up to 3 hours of playtime on a single charge. The headset also features a built-in microphone, which allows users to chat with friends and teammates while gaming.

The Gioteck EX-05 Military Style headset is easy to set up and use. Simply plug the USB connector into a spare USB port on your PS3 console, and connect the Mini Jack end of the provided RCA/Mini Jack Cable into the corresponding socket on the Gioteck Wireless Receiver. You will then need to pair the Wireless Control Box with the Wireless Receiver by pressing and holding the mute button for 5 seconds. Once the two devices are paired, you will be able to hear yourself talking into the microphone through the headset earcups.

EX
-
05
WIRELESS PS3
QUICK SETUP GUIDE
Set Up
CHARGING THE WIRELESS CONTROL BOX
Page 1 of 6
The Wireless Control Box contains a rechargeable Lithium-ion battery. It is
strongly recommended to fully charge the battery for 3 hours before first use.
1 To charge the Wireless Control Box plug the mini jack connector (of the
supplied mini jack to USB cable) into the socket on the ‘game’ side of the
Wireless Control Box.
2 Plug the USB connector into a spare USB port on your PS3.
3 The LED will glow red when charging. (Note: the PS3 must be turned on and
not in standby mode for the headset to charge).
1
2
3
HEADSET
CONNECTOR
1 Connect the AV RCA Cable into the back of your PS3 console.
2 Plug the USB connector attached to the Gioteck Wireless Receiver into an
available USB port on the front of your PS3 Console.
3 Connect the Mini Jack end of the provided RCA/Mini Jack Cable into the
corresponding socket on the Gioteck Wireless Receiver.
4 Connect the AV RCA Cables RED/WHITE plugs into the corresponding sockets
of the RCA/Mini Jack Cable coming from the Gioteck Wireless Receiver.
5 Plug the yellow AUDIO connector into the Video IN socket of your TV/Monitor.
6 Turn on your console and make sure that your controller is wirelessly
connected to your console (do not leave the controller charging or it may
transfer electrical noise into your headset)
3
You need the following cable for this set up option:
1. AV RCA CABLE (which came with the console)
AV MULTI OUT
USB
AV RCA CABLE
(SUppLIEd wITh
pS3 COnSOLE)
Set Up
PLAYSTATION 3 WITH A/V CABLES
(Without HDMI)
1
4
5
2
Page 2 of 6
YELLOW/
VIDEO
TV/MONITOR
INPUTS
Set Up
PAIRING THE WIRELESS CONTROL BOX
Page 3 of 6
7 Turn the Wireless Control Box ON (The power switch is on the ‘game’ side of
the Wireless Control Box).
8 Press and hold the mute button for 5 seconds.
9 The Wireless Receiver (A) and Wireless Control Box (B) LEDs will flash
repeatedly until paired solid LED.
10 Go to Settings > Accessory Settings > Audio Device Settings and select
EX-05 Headset (which will appear in the drop down menu) for both the Input
and Output. You will be able to hear yourself talking into the microphone
through the headset earcups. Set the desired volume level.
11 Go to Settings > Sound Settings > Audio Output Settings, choose Audio
Input Connector/ Scart / AV Multi.
7
A
B
8
HEADSET
CONNECTOR
Set Up
PLAYSTATION 3 WITH HDMI CABLE
(HDMI Option 1)
1 Connect the HDMI lead between the PS3 and your TV/Monitor.
2 Connect the AV RCA cable into the back of your PS3.
3 Plug the USB connector attached to the Gioteck Wireless Receiver into an
available USB port on the front of your PS3 Console.
4 Connect the Mini Jack end of the provided RCA/Mini Jack Cable into the
corresponding socket of the Gioteck Wireless Receiver.
5 Connect the AV RCA Cables RED/WHITE plugs into the corresponding sockets
of the RCA/Mini Jack Cable coming from the Gioteck Wireless Receiver.
You need the following cables for this set up option:
1. AV RCA CABLE (which came with the console) 2. HDMI CABLE (not supplied)
AV MULTI OUThdMI OUTpUT
USB
hdMI CABLE
(nOT SUppLIEd)
TV/MOnITOR
hdMI InpUT
AV RCA CABLE
(SUppLIEd wITh
pS3 COnSOLE)
21
5
4
3
Page 4 of 6
Set Up
PAIRING THE WIRELESS CONTROL BOX
Page 5 of 6
6 Turn the Wireless Control Box ON (The power switch is on the ‘game’ side of
the Wireless Control Box).
7 Press and hold the mute button for 5 seconds.
8 The Wireless Receiver (A) and Wireless Control Box (B) LEDs will flash
repeatedly until paired solid LED.
9 Go to Settings > Accessory Settings > Audio Device Settings and select
EX-05 Headset (which will appear in the drop down menu) for both the Input
and Output. You will be able to hear yourself talking into the microphone
through the headset earcups. Set the desired volume level.
10 Go to Settings > Sound Settings > Audio Output Settings, choose Audio
Input Connector/ Scart / AV Multi.
6
A
B
7
HEADSET
CONNECTOR
Set Up
PLAYSTATION 3 WITH HDMI CABLE
(HDMI Option 2)
hdMI OUTpUT
hdMI CABLE
(nOT SUppLIEd)
TV / MOnITOR
hdMI InpUT
WHITE
RED
2
1
You need the following cable for this set up option:
1. HDMI CABLE (not supplied)
N.B. Your TV/monitor will need to have Audio Out (RED/WHITE) sockets. Most, but not all TVs/
Monitors have RED/WHITE Audio IN and YELLOW Video IN sockets but not all TV’s,and even
fewer monitors have RED/WHITE Audio OUT sockets!
1 Connect the HDMI lead between your PS3 Console and TV/Monitor.
2 Plug the USB connector attached to the Gioteck Wireless Receiver into an
available USB port on the front of your PS3 Console.
3 Connect the Mini Jack end of the provided RCA/Mini Jack Cable into the
corresponding socket of the Gioteck Wireless Receiver.
4 Plug the RED/WHITE connectors (from the Mini Jack Cable coming from the
Gioteck Wireless Receiver) into the Audio OUT RED/WHITE sockets on your
TV/Monitor
Please note that you may need to make some adjustments to your TV/Monitors
settings to enable the audio to come through the headset (Consult your TV
manual)
Then proceed as HDMI Option 1, Instructions 6 10.
TV / MONITOR
AUDIO OUT
Page 6 of 6
USB
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Gioteck EX-05 Military Style Quick Setup Manual

Type
Quick Setup Manual

Gioteck EX-05 Military Style is a wireless headset designed for use with the PlayStation 3 gaming console. The headset features a rechargeable Lithium-ion battery, which provides up to 3 hours of playtime on a single charge. The headset also features a built-in microphone, which allows users to chat with friends and teammates while gaming.

The Gioteck EX-05 Military Style headset is easy to set up and use. Simply plug the USB connector into a spare USB port on your PS3 console, and connect the Mini Jack end of the provided RCA/Mini Jack Cable into the corresponding socket on the Gioteck Wireless Receiver. You will then need to pair the Wireless Control Box with the Wireless Receiver by pressing and holding the mute button for 5 seconds. Once the two devices are paired, you will be able to hear yourself talking into the microphone through the headset earcups.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI