Page is loading ...
EX
-
05
WIRED PS3
QUICK SETUP GUIDE
AV MULTI OUT
USB
AV RCA CABLE
(SUppLIEd wITh
pS3 COnSOLE)
HEADSET
CONNECTOR
SLIDE SWITCH
TO PS3
Set Up
PLAYSTATION 3 WITH A/V CABLES
(Without HDMI)
1 Plug the AV RCA Cable into the back of your PS3 console.
2 Connect the RED/WHITE plugs into the corresponding RED/WHITE sockets of the
cables coming from the Gioteck Inline Controller.
3 Plug the yellow VIDEO connector into the Video IN socket of your TV/Monitor.
4 Plug the USB lead attached to the Gioteck Inline Controller into an available USB port
on the front of your PS3 Console.
5 Make sure the switch on the Gioteck Inline Controller is set to PS3 and the
microphone is not set to mute.
6 Turn on your PS3 Console.
7 Go to Settings > Accessory Settings > Audio Device Settings and select EX-05
Headset (which will appear in the drop down menu) for both the Input and Output.
You will be able to hear yourself talking into the microphone through the headset
earcups. Set the desired volume level.
8 Go to Settings > Sound Settings > Audio Output Settings, choose Audio Input
Connector/ Scart / AV Multi.
1
2
3
4
5
You need the following cable for this set up option:
1. AV RCA CABLE (which came with the PS3 console)
Page 1 of 3
SLIDE SWITCH
TO UN-MUTE
YELLOW/
VIDEO
TV/MONITOR
INPUTS
Set Up
PLAYSTATION 3 WITH HDMI CABLE
(HDMI Option 1)
1 Connect the HDMI lead between the PS3 console and your TV/Monitor.
2 Plug the AV RCA Cable into the back of your PS3 console.
3 Connect the RED/WHITE plugs into the corresponding sockets attached to the
Gioteck Inline Controller.
4 Plug the USB lead attached to the Gioteck Inline Controller into an available USB port
on the front of your PS3 Console.
5 Make sure the switch on the Gioteck Inline Controller is set to PS3 and the
microphone is not set to mute.
6 Turn on your PS3 Console.
7 Go to Settings > Accessory Settings > Audio Device Settings and select EX-05
Headset (which will appear in the drop down menu ) for both the Input and Output.
You will be able to hear yourself talking into the microphone through the headset
earcups. Set the desired volume level.
8 Go to Settings > Sound Settings > Audio Output Settings then choose Audio Input
Connector/ Scart / AV Multi.
You need the following cables for this set up option:
1. AV RCA CABLE (which came with the PS3 console) 2. HDMI CABLE (not supplied)
AV MULTI OUThdMI OUTpUT
USB
hdMI CABLE
(nOT SUppLIEd)
TV/MOnITOR
hdMI InpUT
AV RCA CABLE
(SUppLIEd wITh
pS3 COnSOLE)
HEADSET
CONNECTOR
SLIDE SWITCH
TO PS3
21
3
4
5
SLIDE SWITCH
TO UN-MUTE
Page 2 of 3
Set Up
PLAYSTATION 3 WITH HDMI CABLE
(HDMI Option 2)
hdMI OUTpUT
USB pORT
hdMI CABLE
(nOT SUppLIEd)
TV / MOnITOR
hdMI InpUT
WHITE
RED
HEADSET
CONNECTOR
SLIDE SWITCH
TO PS3
2
1
SLIDE SWITCH
TO UN-MUTE
You need the following cable for this set up option:
1. HDMI CABLE (not supplied)
N.B. Your TV/Monitor will need to have Audio Out (RED/WHITE) sockets. Most, but not all TVs/
Monitors have RED/WHITE Audio IN and YELLOW Video IN sockets but not all TV’s,and even
fewer monitors have RED/WHITE Audio OUT sockets!
1 Connect the HDMI lead between your PS3 console and TV/Monitor.
2 Plug the RED/WHITE connectors attached to the Gioteck Inline Controller into the
Audio OUT RED/WHITE sockets on your TV/Monitor.
Please note that you may need to make some adjustments to your TV/Monitor’s settings
to enable the audio to come through the headset (Consult your TV manual).
Then proceed as HDMI Option 1, Instructions 4 – 9.
TV / MONITOR
AUDIO OUT
Page 3 of 3
/
