Optimus XELLIP ROUTEUR User manual

Brand: Optimus

Model: XELLIP ROUTEUR

Type: User manual

1 XELLIP Server - 604-0004C

TECHNICAL SHEET

XELLIP

System

ROUTER SERVER

Installation

Programming

Connection Use

INTRODUCTION

Product reference: 540,000

The XELLIP Router Server is integrated in a complete and powerful Full IP multimedia system. It is native SIP, and

includes the following features:

 Manage up to 20 SIP stations (configuration, visualization, saving)

 Manage audio and video calls

 Manage call groups

 Manage call zones

 Manage paging groups

 Make SIP Trunk (SIP interconnection of two SIP systems)

 Configure dialing rules

 Configure external extensions

 User management

 It can be configured, monitored and operated from any browser, with its embedded web server

 System administration.

 It includes a POE power supply

 Secure the Ethernet network by using the 802.1X protocol (Radius

 Integrate SNMP protocol (Simple Network Management Protocol)

2 XELLIP Server - 604-0004C

CONNECTION

15-30VDC Power supply

RJ45: ETHERNET & 10/100 POE

USB (NC)

Logic input

Relay output

E C

• Connecting the power supply

A 15-30V power supply is required. The device can be powered by the POE network (option).

• Connecting the IP network

The connection is done by an Ethernet 10/100 Mbps RJ45.

FUNCTIONS

• General Server Functions

The Router Server was designed to administer and manage up to 20 stations. Stations and SIP softphones can be managed.

 Viewing the server status: this gives an overall view of the stations and of their status.

 General configuration: we can define the number of digits for extensions, the call times, priorities, etc.

 Defining stations: this menu is for adding, modifying, or deleting a station.

 Server configuration: In this menu, we can add, modify or delete a server.

 Call group: We can configure several call groups. Every group may contain several stations. When a group

is called, the first one that replies enters into a conversation, and the call disappears from others stations of

the group.

 Call areas: used for managing overflows. In a call area, if a station does not reply, the call is then sent to

other stations.

 Paging Group: used for configuring paging call groups. If they receive a call, members of a paging group

then pick up and can all listen to the conversation.

• Functions of interconnection with external systems: SIP Trunk

 Configuration of SIP Trunk connection either as client or as server.

 Set dialing rules to be used to make calls to the registered stations on external systems.

 Define external extensions to identify extensions on external servers by giving them a local number. These

extensions are then used when configuring overflow or creating call groups.

• User function of the Web server

The Web server of the station allows granting, modifying or deleting the rights to the users by specifying their login,

password and language.

• Administration management SNMP

The station includes an agent SNMP (Simple Network Management Protocol) to respond to SNMP requests and to send

notifications (traps) to a SNMP manager.

From web pages, you can:

 Configure different community (read / write)

 Configure system data (“sysContact” and “sysLocation”)

 Configure notifications (recipient, community ...)

 Download “MIB Castel”

It supports SNMPv1 and SNMPv2c versions.

3 XELLIP Server - 604-0004C

INSTALLATION

• Wall installation:

Fix the base with four screws of 3-3.5 diameter max (see the diagram below for positioning).

85 26

CONFIGURATION

The station is delivered by default with a DHCP address. If no DHCP server is present, then the

station will take a fixed IP address of domain IP4All: 169.254.xx.xx. The IP address of station will

be found by the application CastelIPSearch.

The username is: admin

Password: admin

Connect the Server to the IP network. Then open a browser on your PC and type the address of the

device: https://IP address for station

Accept the certificate.

4 XELLIP Server - 604-0004C

Type the username (admin) and the password (admin) and "send"

Press "complete display": this gives you access to all available functions

The functions are explained in more detail in online help on the server webpages.

TECHNICAL PROPERTIES

• Compliance with European standards

-Security rules according to norm EN 60950.

-CEM transmission according to norm EN 55022 class B.

-CEM immunity according to norm EN 55024.

• Mechanical properties

-IP40 degree of protection according to EN 60529.

-Case painted in light grey RAL 7035

-Dimensions: H 137mm x L 105mm x W 33mm Weight:

400g

-Protruding installation.

• General electrical properties

-Class 3 protection against electric shocks according to EN

60950.

-Storage temperature: -20° / + 70° C.

-Relative humidity < 90%.

-Operating temperature: -20 to + 50° C.

-Power supply: 15VDC (15V to 30V).

-Consumption: 15V 250 mA

• Inputs:

-1 protected and filtered digital input.

-Acquisition speed 5Hz (200ms)

4K7 closed contact input impedance

22K open contact input impedance

• Output:

-Voltage free relay output

-42.4 Vac/60 Vdc/5A/150VA relay cut power

-Maximum frequency is 5 Hz (Minimum commutation

time: 200ms)

• Audio Codec:

-G711 M/A

-GSM

-G722

• Video Codec:

-H263

-H263-1998

-H264

• DTMF:

-RFC-2833

-SIP INFO

• 10/100 Mbit Ethernet network:

-Fixed IP or DHCP

-WIFI network that complies with IEEE 802.11b/g

standards

-POE class2 that complies with IEEE 802.3af

standards

-802.1X protocol (Radius)

-SNMP v1 & v2c

Environmental protection

Dispose of this product in

compliance with environmental

preservation regulations

CASTEL

Z.I. de Saint Lambert des levées - 49412 SAUMUR Cedex - FRANCE

www.castel.fr - Tel: +33 2.41.40.41.40 - Fax: +33 2.41.40.41.49

This document is not contractual. The manufacturer reserves the right to apply any modifications that it deems useful, without any notice.

Optimus XELLIP ROUTEUR User manual

Optimus XELLIP ROUTEUR User manual

Optimus XELLIP ROUTEUR User manual

Related papers

Other documents