Omega IM05-PKH2 Installation guide
- Category
- Motorcycle Accessories
- Type
- Installation guide
+12VDC
Platform # 05 Firmware: PKH2
Description: Honda/Acura Transponder Interface: TYPE-A (4 Wire Connector) NO KEY REQUIRED
Functions: Override OEM Transponder Immobilizer Via Data
Downloadable Firmware for Platform #05: PKG3,PKG8,PKH1, PKH2,PKH3,PKH4,PKHY1,PKM2,PKN2,PKT2
WARNING: Before beginning your install go to www. .com and be sure to print the LATEST corresponding installation manual
for the firmware that is flashed to the platform you are using.
INTELLIKITS
Installation
Manual (1\2 Pages)
Red
Green
Blue
Violet
Black
Violet/White
Pink
Pink/White
Chassis Ground
(+)12 Volt Constant
Data (Key Side)
Brown
Ground When Running
D2D
10 PIN HARNESS
INPUT
INPUT
DATA INPUT
DATA OUTPUT
(-)
(+)
(-)
4 PIN DATA TO DATA (D2D) CABLE (OPTIONAL ACCESSORY)
Data (ECM Side)
See Wire Connection Guide for detailed information regarding wire functionality
P.C.
USB Adaptor
USB Cable
Option A
Firmware Upgrades
Blue
Brown
CLEARCODE VIP
DATA PORT
Option B - Data 2 Data Connection to RCS Data Port
Section A
N/C
N/C
N/C
Orange
LED
Programming
button
D2D
Internet
Section B
N/C
DATA to DATA PORT (D2D): of D2D Cable plugs into the upgradeable vehicle interface module.
OPTION A: - D2D Port used to connect to USB Bootloader adaptor & computer to download & flash vehicle interface firmware.
OPTION B: - D2D Port used to connect to the data port of a remote control system equipped with ClearCode Vehicle Interface Protocol.
Remote control systems designed with ClearCode VIP can securely communicate via the D2D cable to transmit & receive data commands which initiate
specific vehicle function such as doorlocks & immobilizer override and /or request information from the vehicle such as status of entry points (doors) or
ambiant température, diesel glow plug etc… ClearCode VIP represents the doorway to vehicle integration...As an enhanced security feature, this upgradeable
vehicle interface module automatically detects when the Vehicle Interface Protocol is present and deactivates the analogue override input wire (brown wire)
ensuring that this module can only be activated by an authorized user.
Blue connector
Legend RCS = Remote Control System N/C = No Connection N/A = Not Applicable W2W= analogue wire to wire D2D= data 2 data
(-)
/(+)
(-)
Input
Input
Input
Data
Output
I/O
STATUS
WIRE
COLOR
Brown
Green
Blue
Vio let/
White
Violet
Pink/
White
Pink
Orange
Red
Black (-)
(+)
SPECIFIC WIRE CONNECTION LOCATION
Constant (+) 12 Volt Source
Connect to Vehicle Brown/Black ground wire
Connect
Location
Vehicle
Vehicle
Vehicle
ACTIVATION and/or FUNCTIONALITY
RCS
Power Source
Ground Source
WIRE GUIDE: CONNECTIONS
Data Commands from Module to Vehicle
PIN#
1
2
3
4
5
6
7
8
9
10
Ground When Running Output of Remote Starter
10 PIN HARNESS
D2D
w2w
D2D = Optional use of 4 Pin Data to Data (D2D) cable will replace the analogue wire (w2w) connection
D2D
w2w
w2w
D2D
w2w
D2D
w2w
N/C
N/C
N/C
N/C
N/C
N/C
Immobilizer Bypass Via Data
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall
the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or
any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product are liable for consequential damages sustained in
connection with this product neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.
N/C
Connect to Vehicle Data wire (ECM Side)
(See Vehicle Wiring Reference Chart on Page 2)
N/C
ECM
Side
HONDA/ACURA
IMMOBILIZER
MODULE
Synchro
Key
Side
N/C N/C N/C N/C
N/C
N/C
w2w Data
Input
Vehicle
Connect to Vehicle Data wire (Key Side)
(See Vehicle Wiring Reference Chart on Page 2)
Data Commands from Module to Vehicle
N/C N/C
N/C
N/C N/C
N/C
Ground
Data
Ground
Synchro
N/C
N/CN/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
Vehicle
Connect to Synchro wire of vehicle
(See Vehicle Wiring Reference Chart on Page 2)
w2w
N/C
INPUT
Input
UPGRADEABLE
OVERRIDE OEM
TRANSPONDER
IMMOBILIZER
VIA DATA
INPUT
Syncronizes Vehicle Data with Module
VEHICLE PROGRAMMING:
Section C
1) Once module has been properly connected, turn key to IGNITION position.
2) When LED flashes 4 times, module is now programmed. Turn key OFF.
*To RESET, press and hold button and plug in module. LED comes on. When LED goes off, release button.
*IF LED flashes rapidly for 5 seconds, this means your ignition wiring is fine, but the GWR is not. Check this connection at the remote system.
*IF LED flashes 1 time (rapidly), the ignition and GWR are fine.
B
Data
Synchro
DATA SYNCHRO GROUND
ACCORD
1998-2002
Blue
Pos.#3
ODYSSEY
1999-2004
ACURA MDX
2001-2002
ACURA CL
1998-2002
ACURA TL
1998-2003
VEHICLE
Brown/Black
Pos.#4
Red
Pos.#2
Orange/Blue
Pos.#3
Blue/Green
Pos.:#2
Brown/Black
Pos.:#4
Brown/Yellow
Pos.#4
Blue
Pos.#3
Red
Pos.#2
Brown/Yellow
Pos.#4
Blue
Pos.#3
Blue/Green
Pos.#2
Brown/Black
Pos.#4
PILOT
2003-2004
Blue
Pos.#3
Red
Pos.#2
Brown/Yellow
Pos.#4
Red
Pos.#2
Orange/Blue
Pos.#3
VEHICLE WIRING REFERENCE CHART
Section D
Platform # 05 Firmware: PKH2
Description: Honda/Acura Transponder Interface: TYPE-A (4 Wire Connector) NO KEY REQUIRED
Functions: Override OEM Transponder Immobilizer Via Data
Installation
Manual (2\2 Pages)
TECH NOTE: PKH2 COMPATIBILITY RULE OF THUMB
PKH2 Can be used on TYPE “A” Honda/Acura Immobilizer systems. To identify this, look for the Green 5 PIN w/4 wire connector
If you see 4 wires coming from the Green plug, the PKH2 is the right Transponder Bypasskit to use.
Section E
ACURA INTEGRA
2000-2001
Blue
Pos.#3
Red
Pos.:#2
Brown/Black
Pos.:#4
-
1
-
2
Omega IM05-PKH2 Installation guide
- Category
- Motorcycle Accessories
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Mazda MPV/Miata User manual
-
Xpresskit XK09-DLPKHO Installation guide
-
Honda PKH3 User manual
-
Directechs DB3 Installation guide
-
Directed Electronics DB3 User manual
-
Xpresskit DBALL2 Installation guide
-
Directed DBALL-GM10 XPRESSKIT Quick Reference Manual
-
-
-
