Honda PKH3 User manual

Category
Motorcycle Accessories
Type
User manual

Honda PKH3 is a transponder interface that allows you to bypass the factory immobilizer system in your vehicle. This can be useful if you want to install a remote start system, keyless entry system, or other aftermarket security device. The PKH3 is compatible with a wide range of Honda and Acura vehicles, and it is easy to install. With the PKH3, you can enjoy the convenience of aftermarket security features without sacrificing the security of your factory immobilizer system.

Here are some of the features and benefits of the Honda PKH3:

  • Bypass factory immobilizer system
  • Compatible with a wide range of Honda and Acura vehicles

Honda PKH3 is a transponder interface that allows you to bypass the factory immobilizer system in your vehicle. This can be useful if you want to install a remote start system, keyless entry system, or other aftermarket security device. The PKH3 is compatible with a wide range of Honda and Acura vehicles, and it is easy to install. With the PKH3, you can enjoy the convenience of aftermarket security features without sacrificing the security of your factory immobilizer system.

Here are some of the features and benefits of the Honda PKH3:

  • Bypass factory immobilizer system
  • Compatible with a wide range of Honda and Acura vehicles
TO ECM
1
65
4
3
27
Front view of connector
Module Programming
Red
Orange
Green
Blue
Violet
Black
Violet/White
Pink
Pink/White
Data 2 Data (Optional)
USB
CHASSIS GROUND
(+)12 VOLT CONSTANT
NC
/
Ignition Input from ECM (See Vehicle Wire List for Pin # and Wire Color)
Ignition Out (See Vehicle Wire List for Pin # and Wire Color)
Data (See Vehicle Wire List for Pin # and Wire Color)
NC
/
Ignition Input from ECM (See Vehicle Wire List for Pin # and Wire Color)
Upgrade (Optional)
OR
Programming button
NC
/
P.C.
Programming
Interface
Brown (-)
REMOTE
SYSTEM
Ground output when running (-) (remote start installations only)
Ground output when running (-) (remote start installations only)
N/C
Ignition Input from ECM (See Vehicle Wire List for Pin # and Wire Color)
N/C
Data
Ignition Out (See Vehicle Wire List for Pin # and Wire Color)
Ignition Input from ECM (See Vehicle Wire List for Pin # and Wire Color)
N/C
(+)12 VOLT CONSTANT
CHASSIS GROUND
2
1
D2U
Programming
LED
10 PIN HARNESS
Reset
Press and hold programming button and plug module into 10 pin
harness, LED comes ON. When LED goes OFF, release
program button.
1. Press and hold programming button.
2. Turn the ignition key to the “ON” position, the LED will blink.
3. Release programming button.
4.Turn ignition key to the “OFF” position.
Brown
Green
Blue
Violet/White
Violet
Pink/White
Pink
Orange
Red
Black
10 PIN HARNESS
This connector has dual functions: 1) XKLOADER Firmware Upgrades. 2) 4 Pin Data 2 Data connector to remote system, which replaces
wire to wire (w2w) connection on the 10 Pin Harness.
D2U
WIRE FUNCTIONS
Firmware: PKH3 - Installation Instructions
Platform #05 firmware:- *PKT2, PKH1, PKH2, PKH3, PKH4, PKN2, PKM2, PKHY1,
PKG3, PKG8
Honda/Acura Transponder Interface: TYPE-C (7 Wire Connector)
*Default Firmware
Check for firmware updates before installing
This bypass kit / Data Bus Interface part has been tested
on the listed vehicles. Other vehicles will be added to the
select vehicle list upon completion of compatibility
testing. Visit website for latest vehicle application guide.
: Under no circumstances shall the
manufacturer or the distributors of the bypass kit / data
bus interface part(s) be held liable for any consequential
damages sustained in connection with the part(s)
installation. The manufacturer and it’s distributors will
not, nor will they authorize any representative or any
other individual to assume obligation or liability in
relation to the by passkit / data bus interface part(s) other
than its replacement.
DISCLAIMER
Downloadable @ www.XpressDownload.com
Data (Code)
Ignition Ground (Gnd)
Acura EL 1.7
2005 - 01
Brown/ Yellow
Pos.:#1
Acura MDX
2005 - 03
Acura RSX
2005 - 02
VEHICLE
Red/Blue
Pos.:#2
Black/Yellow
Pos.:#6
Red/Blue
Pos.:#2
Red
Pos.:#2
Green/White
Pos.:#6
Black/Yellow
Pos.:#6
Brown/ Yellow
Pos.:#1
Brown/ Yellow
Pos.:#1
Acura TSX
2005 - 03
Red/Blue
Pos.:#2
Black/Yellow
Pos.:#6
Brown/ Yellow
Pos.:#1
Honda CRV
2005 - 03
Honda Accord
2005 - 03
Brown/ Yellow
Pos.:#1
Brown/ Yellow
Pos.:#1
Red/Blue
Pos.:#2
White
Pos.:#2
Black/Yellow
Pos.:#6
Black/Yellow
Pos.:#6
Red/Blue
Pos.:#2
Black/Yellow
Pos.:#6
Brown/ Yellow
Pos.:#1
Honda Element
2005 - 03
Brown/ Yellow
Pos.:#1
White
Pos.:#2
Black/Yellow
Pos.:#6
Honda Civic
2005 - 01
Acura TL
2005 - 04
Brown/ Yellow
Pos.:#1
Red/Blue
Pos.:#2
Black/Blue
Pos.:#6
Honda Pilot
2005
Brown/ Yellow
Pos.:#1
Red/Green
Pos.:#2
Red/White
Pos.:#6
Honda Odyssey
2005
Black
Pos.:#1
Red/Blue
Pos.:#2
Black/Yellow
Pos.:#6
Honda Ridgeline
2006
Red/Blue
Pos.:#2
Black/Green
Pos.:#6
Brown/ Yellow
Pos.:#1
  • Page 1 1
  • Page 2 2

Honda PKH3 User manual

Category
Motorcycle Accessories
Type
User manual

Honda PKH3 is a transponder interface that allows you to bypass the factory immobilizer system in your vehicle. This can be useful if you want to install a remote start system, keyless entry system, or other aftermarket security device. The PKH3 is compatible with a wide range of Honda and Acura vehicles, and it is easy to install. With the PKH3, you can enjoy the convenience of aftermarket security features without sacrificing the security of your factory immobilizer system.

Here are some of the features and benefits of the Honda PKH3:

  • Bypass factory immobilizer system
  • Compatible with a wide range of Honda and Acura vehicles

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI