Furniture of America IDF-4111S Installation guide

Brand
Furniture of America
Model
IDF-4111S
Type
Installation guide
I. Align the pre-drilled holes on the table top (#1) with the pre-drilled holes
on the apron (#2).
II. Prepare 6 bolt assemblies by inserting the flat washer (#B) onto the bolt (#A)
and secure using the Allen wrench (#D). Repeat process a second time.
I. Align the pre-drilled holes on legs (#4) to the panels.
II. Prepare 18 bolt assemblies by inserting the flat washer (#B)
onto the bolt (#A) and secure using the Allen wrench (#D).
I. Align the pre-drilled holes on the fourth leg (#4) to the panels.
II. Prepare 6 bolt assemblies by inserting the flat washer (#B)
onto the bolt (#A) and secure using the Allen wrench (#D).
Insert the threaded end of 2 trundles (#5) and the threaded end of 2
trundles with locks (#6) into the bottom corners using the wrench (#C).
ASSEMBLY IS COMPLETED
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Furniture of America IDF-4111S Installation guide

Brand
Furniture of America
Model
IDF-4111S
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents