Furniture of America IDF-3185DG-SC Installation guide

Brand: Furniture of America

Model: IDF-3185DG-SC

Type: Installation guide

I. Align the seat cushion (#2) to the pre-drilled hole on the chair back (#1).

II. Prepare a bolt assembly by FIRST inserting the lock washer (#D) onto the bolt (#C) then the

flat washer (#E) onto that same bolt (#C). Insert into the center hole of the seat cushion and

secure using the wrench (#F).

Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#A) then the

flat washer (#E) onto that same bolt (#A). Insert into the corner holes of the seat cushion and

secure using the wrench (#F).

I. Align the front legs (#3) to the pre-drilled holes on the front of the seat cushion (#2).

II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#B) then the

flat washer (#E) onto that same bolt (#B). Insert into the inner holes of the seat cushion and

secure using the wrench (#F).

Carefully turn the completed chair upright. Make sure the chair is rested on a flat surface and does

not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.

ASSEMBLY IS COMPLETED

1
2
3
4
5

Furniture of America IDF-3185DG-SC Installation guide

Brand: Furniture of America

Model: IDF-3185DG-SC

Type: Installation guide

Related papers

Other documents