Hagerco 9852HD - 9800 Heavy Duty Series - Pocket Door Frame Kit Installation guide

Type
Installation guide

This manual is also suitable for

Hagerco 9852HD - 9800 Heavy Duty Series - Pocket Door Frame Kit is exceptional for its ability to save you space, reduce noise, and create a smooth and elegant look for your home. Whether you want to save space or add a touch of modern style to your home, this pocket door frame kit is the perfect solution. With its heavy-duty construction, this kit can accommodate doors weighing up to 250 pounds, making it ideal for any room in your home. The kit includes everything you need for a complete installation including the door frame, track, and hardware.

Hagerco 9852HD - 9800 Heavy Duty Series - Pocket Door Frame Kit is exceptional for its ability to save you space, reduce noise, and create a smooth and elegant look for your home. Whether you want to save space or add a touch of modern style to your home, this pocket door frame kit is the perfect solution. With its heavy-duty construction, this kit can accommodate doors weighing up to 250 pounds, making it ideal for any room in your home. The kit includes everything you need for a complete installation including the door frame, track, and hardware.

9639CS Mullion Converging Kit
Installation Instructions
I-SD00402
Rev -, Rev Date: 11/04/20
Always visit www.hagerco.com for the latest Installation Instructions
HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 (800) 325-9995
Page 1 of 2
Contents:
Qty:
2
2
2
2
1
The Mullion Converging Kit allows two pocket door frames to make one large
doorway
1 Prepare the Rough Opening
The rough opening width is equals to four
times the door width
The rough opening height stays the same as
the rough opening height stated on the
installation instructions included with the
pocket door kit
2 Cut the Headers
Cut 7/8” (22.23 mm) off
the doorway end of the
header and track
assemblies. Make sure to
cut the wood square. Do
not cut the track.
Figure 1
3 Combine the Two Headers
Figure 2
Butt the sawed ends together
Drill two 1/4” (4.76 mm) holes through the doorway
side header using the mullion bracket’s outer holes as
a template. Make sure the mullion brackets are
centered.
Insert the two bolts included in this kit through the
outer holes of the mullion brackets and the holes
created earlier
Insert the nuts included in this kit to the bolts and
tighten. See Figure 2.
5.
4.
1.
2.
3.
`
9639CS Mullion Converging Kit
Installation Instructions
I-SD00402
Rev -, Rev Date: 11/04/20
Always visit www.hagerco.com for the latest Installation Instructions
HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 (800) 325-9995
Page 2 of 2
4 Hang the Combined Headers
Figure 3
5 Finish
Insert the center stop
bumpers into the
doorway end of the
tracks. Leave them
loose until the doors
are hung.
Figure 4
Drill a 1/4” (6.35 mm) hole through the center of the
mullion bracket where the doorway side headers
meet.
Hang the combined assembly.
Insert the lag screw through the holes created earlier.
Fasten the lag screw to the rough header.
Adjust to level the header assembly. See Figure 3.
Proceed with the regular pocket door kit assembly
instructions
  • Page 1 1
  • Page 2 2

Hagerco 9852HD - 9800 Heavy Duty Series - Pocket Door Frame Kit Installation guide

Type
Installation guide
This manual is also suitable for

Hagerco 9852HD - 9800 Heavy Duty Series - Pocket Door Frame Kit is exceptional for its ability to save you space, reduce noise, and create a smooth and elegant look for your home. Whether you want to save space or add a touch of modern style to your home, this pocket door frame kit is the perfect solution. With its heavy-duty construction, this kit can accommodate doors weighing up to 250 pounds, making it ideal for any room in your home. The kit includes everything you need for a complete installation including the door frame, track, and hardware.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI