Extron TLP Pro 1225MG Template

P/N 68-3573-01

Rev. A

Outer Edge of Front Bezel

(Do not cut this line.)

Mounting Holes (4)

11.03"

(280.2 mm)

0.70"

(17.7 mm)

3.66"

(93 mm)

0.27"

(6.8 mm)

Cut-Out Template for the Extron

TLP Pro 1225MG

6.65"

(168.9 mm)

9.63"

(244.6 mm)

SURFACE

CUT-OUT

AREA

Page size: 11" x 17"

Print scale 1:1

Do not shrink.

1. Confirm the product to be installed.

2. Before printing, check the print settings

and make sure the page is not scaled.

3. After printing, measure the cut-out area (gray)

and ensure it matches the dimensions shown

on this template.

4. Remove the surface cut-out area from the

template. (Keep these instructions.)

5. Use this template to mount the TLP Pro 1225MG.

For complete instructions, see the product

Setup Guide or User Guide.

2.72"

(69.1 mm)

0.70"

(17.7 mm)