2. Goodway
  3. CTV-1501
CTV-1501

Goodway CTV-1501 User guide

  • Hello! I've reviewed the provided Quick Start Guide for the GOODWAY CTV-1501 Cooling Tower Vacuum. This document details the essential steps for proper startup and priming, including instructions on submerging the cleaning tool, purging air from hoses, and using the prime valve. I'm ready to answer your questions about the CTV-1501 and its operation.
  • What should I do before starting the cleaning process?
    How do I prime the unit?
    What should I do if the unit fails to prime?
CTV-1501 Quick
Start Guide
PLEASE REVIEW
IMPORTANT SAFETY
INSTRUCTIONS
LOCATED IN
OPERATORS MANUAL
Proper Startup
Essentials
* Accessories sold separately
PLEASE REVIEW IMPORTANT SAFETY INSTRUCTIONS
LOCATED IN THE OPERATORS MANUAL CTV-F2 Optional Filter
GETTING READY
Outlet Hose Prime Valve
Closed
Inlet Valve
Open
Outlet Valve
Closed
Power
Switch
OFF
Inlet Hose
PRIMING THE
CTV-1501
With the water supply turned on, submerge
the cleaning tool under the surface of the
water in the cooling tower basin.
1
Open the prime valve to…
2
Purge the air from the
inlet hose.
3
When the air
bubbles stop,
go back to the
machine and
turn the power
switch on and
partially open
the outlet valve.
4
GOODWAY® TECHNOLOGIES CORPORATION
420 West Avenue, Stamford, CT 06902 USA
Tel: 203-359-4708 · Toll-Free Tel: 800-243-7932
Fax: 203-359-9601 · Toll-Free Fax: 800-359-9625
Email: goodway@goodway.com
Visit: www.goodway.com
HVAC & FACILITY MAINTENANCE SOLUTIONS
Close the prime valve when a full
column of water is owing. Begin
vacuuming the basin, keeping the
cleaning tool under the surface
of the water. If the unit fails to
prime consult the Operating and
Maintenance Manual.
5
/