2. Goodway
  3. RAM-4

Goodway RAM-4 User guide

  • Hello! I've reviewed the user guide for the GOODWAY RAM-4 tube cleaner. This document provides a quick start for the device, covering assembly, connections and safety checks. I'm ready to answer any questions you might have about setting up and using this device.
  • How do I attach the dolly to the base?
    Where do I connect the air lines?
    How is the brush attached to the shaft?
    What should I do after connecting to the GCFI outlet?
RAM-4 Quick Start Guide
PLEASE REVIEW
IMPORTANT SAFETY
INSTRUCTIONS
LOCATED IN
OPERATORS MANUAL
Proper Startup
Essentials
* Accessories sold separately
Attach the dolly to the base by laying the
machine at and tightening the screws
by hand.
1
The two air lines need to be connected
above the shaft outlet. The air line with the
“Forward” tag should be attached under
“Forward” and the air line without the tag
should be attached under “Reverse”.
2
Inset shaft male coupling into shaft
manifold then push shaft nut into locking
collar to lock in place.
Attach a water hose to the machine and
turn the water supply on.
3 4
Attach the brush
to the shaft by
screwing it in
until tight.
5
GOODWAY® TECHNOLOGIES CORPORATION
420 West Avenue, Stamford, CT 06902 USA
Tel: 203-359-4708 · Toll-Free Tel: 800-243-7932
Fax: 203-359-9601 · Toll-Free Fax: 800-359-9625
Email: goodway@goodway.com
Visit: www.goodway.com
HVAC & FACILITY MAINTENANCE SOLUTIONS
FNL 0823
Connect GCFI to
outlet, test and
reset to ensure
it’s functioning.
6
/