2. Goodway
  3. RAM-5
RAM-5

Goodway RAM-5 User guide

  • I have reviewed the RAM-5 Quick Start Guide and understand the instructions for setting up the device, including connecting the dolly, air lines, and brushes. I'm ready to answer any questions you have regarding the RAM-5 tube cleaner.
  • How to attach the dolly?
    How to connect air lines?
    How to lock shaft coupling?
    How to attach the brush?
RAM-5 Quick Start Guide
PLEASE REVIEW
IMPORTANT SAFETY
INSTRUCTIONS
LOCATED IN
OPERATORS MANUAL
Proper Startup
Essentials
* Accessories sold separately
Attach the dolly to the base by laying the
machine at and tightening the screws
by hand.
1
The two air lines need to be connected
above the shaft outlet. The air line without
the tag on the left, the air line with the
“Forward” label on the right.
2
Insert shaft male coupling into shaft
manifold then push shaft nut into locking
collar to lock in place.
Attach a water hose to the machine and
turn the water supply on.
3 4
MACHINE MUST LAY FLAT
ON DOLLY WHEN IN USE
Attach the brush to the shaft by sliding the quick connect coupling towards the cable and
placing the brush into the tting. Measure out the length of cable you will need and tighten the
shaft stop (Note: brush should extend out the back of the HEX tube only as far as the brush stem).
Refer to manual for proper length.
5
GOODWAY® TECHNOLOGIES CORPORATION
420 West Avenue, Stamford, CT 06902 USA
Tel: 203-359-4708 · Toll-Free Tel: 800-243-7932
Fax: 203-359-9601 · Toll-Free Fax: 800-359-9625
Email: goodway@goodway.com
Visit: www.goodway.com
HVAC & FACILITY MAINTENANCE SOLUTIONS
/