2. Goodway
  3. AWT-100X

Goodway AWT-100X User guide

  • Hello! I'm a chat assistant, and I've reviewed the user guide for the GOODWAY AWT-100X Tube Cleaner. This document covers essential steps for setting up the machine, including connecting the dolly, air and water lines, and attaching the brush. I can answer your questions regarding these procedures and other aspects of the device described in the document.
  • What size should the air line hose be?
    What should the air line be capable of delivering?
    Where is the foot pedal located?
AWT-100X Quick
Start Guide
PLEASE REVIEW
IMPORTANT SAFETY
INSTRUCTIONS
LOCATED IN
OPERATORS MANUAL
Proper Startup
Essentials
* Accessories sold separately
Attach the dolly to the base by laying the
machine at and tightening the screws
by hand.
1
Inset shaft male coupling into shaft manifold
then push shaft nut into locking collar to
lock in place.
2
Attach your air line hose to the
male tting (Note: air line hose
should be at least 1/2” and be
capable of delivering 60 PSI
with 85 CFM).
3
Attach a water hose to the
machine and turn on water supply.
4
GOODWAY® TECHNOLOGIES CORPORATION
420 West Avenue, Stamford, CT 06902 USA
Tel: 203-359-4708 · Toll-Free Tel: 800-243-7932
Fax: 203-359-9601 · Toll-Free Fax: 800-359-9625
Email: goodway@goodway.com
Visit: www.goodway.com
HVAC & FACILITY MAINTENANCE SOLUTIONS
Attach the brush to the
shaft by screwing it in
until tight.
6
Take out the foot pedal in the side compartment of
your machine.
5
/